Computer Vision for Identifying and Classifying Green Coffee Beans: A Review
DOI:
https://doi.org/10.24014/coreit.v8i1.17450Abstract
Coffee is widely consumed around the world, also considered one of the most important beverages today. Factors contributing to the quality of coffee beans such as color, texture, size, aroma, etc. and other processes along the production chain such as plant, roasting, and grinding. Those processes will be worthless if the quality of the coffee bean is low. It is important to only use the best quality coffee beans. Therefore, the challenge is to develop a system that uses computer vision to either identify high quality beans or classify them by their species to ease the effort needed by all actors in the supply chain. Providing information for end customers is a defining factor to push forward the coffee industry. This paper aims to review literatures within the topic of using computer vision for coffee beans. After reviewing a selected number of studies which corresponds with the topic chosen in our paper, computer vision techniques were used for two main reasons, identification and classification. Researches on this topic are still limited. Hence, it can be concluded that there are still plenty of room for study on this topic. This study also aims to help provide research material for future researchers.References
E. R. Arboleda, A. C. Fajardo, and R. P. Medina, “An image processing technique for coffee black beans identification,” in 2018 IEEE International Conference on Innovative Research and Development, ICIRD 2018, 2018.
C. Yeretzian, “Coffee,” in Springer Handbooks, 2017.
E. M. De Oliveira, D. S. Leme, B. H. G. Barbosa, M. P. Rodarte, and R. G. F. Alvarenga Pereira, “A computer vision system for coffee beans classification based on computational intelligence techniques,” J. Food Eng., 2016.
D. S. Leme, S. A. da Silva, B. H. G. Barbosa, F. M. Borém, and R. G. F. A. Pereira, “Recognition of coffee roasting degree using a computer vision system,” Comput. Electron. Agric., 2019.
T. H. Nasution and U. Andayani, “Recognition of roasted coffee bean levels using image processing and neural network,” in IOP Conference Series: Materials Science and Engineering, 2017.
E. R. Arboleda, A. C. Fajardo, and R. P. Medina, “Classification of coffee bean species using image processing, artificial neural network and K nearest neighbors,” in 2018 IEEE International Conference on Innovative Research and Development, ICIRD 2018, 2018.
C. Pinto, J. Furukawa, H. Fukai, and S. Tamura, “Classification of Green coffee bean images basec on defect types using convolutional neural network (CNN),” in Proceedings - 2017 International Conference on Advanced Informatics: Concepts, Theory and Applications, ICAICTA 2017, 2017.
U. Lehtinen, “Traceability in Agrifood Chains,” Intell. Agrifood Chain. Networks, pp. 151–166, 2011.
S. Khan, A. Haleem, M. I. Khan, M. H. Abidi, and A. Al-Ahmari, “Implementing traceability systems in specific supply chain management (SCM) through critical success factors (CSFs),” Sustain., 2018.
M. M. Aung and Y. S. Chang, “Traceability in a food supply chain: Safety and quality perspectives,” Food Control, vol. 39, no. 1, pp. 172–184, 2014.
B. Kitchenham and P. Brereton, “A systematic review of systematic review process research in software engineering,” Information and Software Technology. 2013.
J. Cruz-Benito, “Systematic Literature Review & Mapping,” 2016, p. 67.
H. Steinhart, “Coffee: growing, processing, sustainable production—a guidebook for growers, processors, traders, and researchers. Jean Nicolas Wintgens (Ed). Wiley-VCH Verlag, Weinheim, 2004. 976 pp, ISBN 3-527-30731-1,” J. Sci. Food Agric., vol. 85, no. 11, 2005.
S. Schenker and T. Rothgeb, “The roast—Creating the Beans’ signature,” Cr. Sci. coffee, 2017.
C. Lambot, J. C. Herrera, B. Bertrand, S. Sadeghian, P. Benavides, and A. Gaitán, “Cultivating Coffee Quality-Terroir and Agro-Ecosystem,” in The Craft and Science of Coffee, 2017.
M. D. del Castillo, B. Fernandez-Gomez, N. Martinez-Saez, A. Iriondo, and M. D. Mesa, Coffee By-Products. 2018.
M. Castillo, B. Fernandez-Gomez, N. M. Sáez, and ..., Coffee by-products. digital.csic.es, 2019.
Y. C. Chou et al., “Deep-learning-based defective bean inspection with GAN-structured automated labeled data augmentation in coffee industry,” Appl. Sci., vol. 9, no. 19, 2019.
J. Kosalos, R. Stephen, S. Diaz, P. Songer, and M. Alves, “SCAA Arabica Green Coffee Defect Handbook,” Spec. Coffee Assoc. Am. SCAA, 2006.
C. R. Institute, “SCAA Coffee Beans Classification,” 2006. [Online]. Available: http://www.coffeeresearch.org/coffee/scaaclass.htm. [Accessed: 22-Feb-2022].
D. S. Kalel, P. M. Pisal, and R. P. Bagawade, “A Study of Color, Shape and Texture Feature Extraction for Content Based Image Retrieval System,” Int. J. Adv. Res. Comput. Commun., 2016.
F. Alamdar and M. R. Keyvanpour, “A new color feature extraction method based on quad histogram,” in Procedia Environmental Sciences, 2011.
K. León, D. Mery, F. Pedreschi, and J. León, “Color measurement in L*a*b* units from RGB digital images,” Food Res. Int., 2006.
P. Wang, H. W. Tseng, T. C. Chen, and C. H. Hsia, “Deep convolutional neural network for coffee bean inspection,” Sensors Mater., vol. 33, no. 7, pp. 2299–2310, 2021.
Downloads
Published
Issue
Section
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to CoreIT journal and published by Informatics Engineering Department Universitas Islam Negeri Sultan Syarif Kasim Riau as publisher of the journal.
Authors who publish with this journal agree to the following terms:
Authors automatically transfer the copyright to the journal and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike (CC BY SA) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate permission for non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
