Rancangan Ergonomis Alat Bantu Cuci Mobil
DOI:
https://doi.org/10.24014/jti.v8i1.11050Abstract
Aktivitas mencuci mobil yang dilakukan oleh operator ternyata dapat mengakibatkan musculoskeletal disorders terutama pada punggung dan pinggang. Penelitian lapangan dilakukan langsung di lokasi pencucian pada salah satu unit usaha di Jakarta. pengumpulan data mengambil postur tubuh operator saat bekerja selanjutnya diukur tingkat risiko ergonomi dengan menggunakan metode REBA. Hasil penelitian ini diperoleh skor awal 8 termasuk risiko tinggi dan memerlukan tindakan segera. Untuk mengatasi masalah tersebut, dirancang alat bantu pencucian mobil berdasarkan data antropometri operator. Berdasarkan analisa ergonomi diperoleh skor akhir menjadi 3 dengan tingkat risiko rendah sesuai target perancangan alat bantu.
Car washing activities carried out by operators can actually cause musculoskeletal disorders, especially in the back and waist. Field research was carried out directly at the washing location in one of the business units in Jakarta. data collection takes the operator's posture while working and then measures the level of ergonomic risk using the REBA method. The results of this study obtained an initial score of 8 including high risk and requiring immediate action. To overcome this problem, a car wash tool was designed based on the operator's anthropometric data. Based on the ergonomics analysis, the final score became 3 with a low risk level according to the design target of the tool.
References
C. Berlin and T. Kajaks. (2010) Time-related ergonomics evaluation for DHMs: a literature review. Int. J. Hum. Factors Model. Simul., vol. 1, no. 4, p. 356.
J. Wang, J. C. Thornton, S. Kolesnik, and R. N. Pierson. (2006). Anthropometry in Body Composition: An Overview. Ann. N. Y. Acad. Sci., vol. 904, no. 1, pp. 317–326.
N. A. Ansari and D. M. J. Sheikh. (2014). Evaluation of work Posture by RULA and REBA: A Case Study. IOSR J. Mech. Civ. Eng., vol. 11, no. 4, pp. 18–23.
S. Varmazyar, M. Amini, and S. Kiafar. (2012). Ergonomic Evaluation of Work Conditions in Qazvin Dentists and its Association with Musculoskeletal Disorders Using REBA Method. J. Islam. Dent. Assoc. IRAN, vol. 24, no. 3, pp. 182–187.
Z. Ye, X. Li, and Y. Li. (2013). The Virtual Prototyping Design and Evaluation of Ergonomic Gymnastic Based on CATIA. Int. J. Hybrid Inf. Technol., vol. 6, no. 5, pp. 67–78.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).