Analisis Pengendalian Mutu pada Asam Lemak Bebas Minyak Kelapa Sawit Menggunakan Metode SQC
DOI:
https://doi.org/10.24014/jti.v8i1.15488Abstract
PT. Socfindo Indonesia Seunagan Plantation is a company that produces palm oil and palm kernel (PKO). This observation aims to determine the parameters of free fatty acids in PT. Socfindo Indonesia Seunagan Plantation. Is it within the quality control limits based on the Xbar and Rbar control charts, as well as investigations into the causes of improving the quality of palm oil with Free Fatty Acid (FFA) parameters. Based on the results of the Crude Palm Oil (CPO) quality control chart, the number of samples for free fatty acid levels, according to the control chart Xbar = 2.1375 and Rbar = 1.2308, there are some data that are out of the control limit UCL = 2.7323, CL = 2.1375 LCL = 1.5427 after modification of Xbar and Rbar control chart. Based on the results of observations, interviews and fieldwork, there are five factors that affect the quality of Crude Palm Oil (CPO). The factors themselves are raw materials, work environment, people, machines and work methods and techniques.
This case study was conducted on a company that produces palm oil and palm kernel (PKO). This observation aims to determine the parameters of free fatty acids in this company. Observe whether it is within the quality control limits based on Xbar and Rbar control charts. Then, investigate the cause of the increase in the quality of palm oil with the Free Fatty Acid (FFA) parameter. Based on the results of the Crude Palm Oil (CPO) quality control chart, the number of samples for free fatty acid levels, according to the control chart Xbar = 2.1375 and Rbar = 1.2308, there are some data that are out of the control limit UCL = 2.7323, CL = 2.1375 LCL = 1.5427 after modification of Xbar and Rbar control chart. The results of observations show that in interviews and in the field there are five factors that affect the quality of Crude Palm Oil (CPO). The factors themselves are raw materials, work environment, people, machines and work methods and techniques.
References
Abdullah, M. A. (2015). Aplikasi peta kendali statistik dalam mengontrol hasil produksi suatu perusahaan. Saintifik, 1(1), 5–13.
Anastasya, A., & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1, 15–21. https://doi.org/https://doi.org/10.55826/tmit.v1iI.4
Diniaty, D., Hanum, F., & Hamdy, M. I. (2019). Analisis Pengendalian Mutu (Quality Control) CPO (Crude Palm Oil) pada PT. XYZ. J. Tek. Ind, 5(2), 92–99.
Murnawan, H. (2014). Perencanaan Produktivitas Kerja Dari Hasil Evaluasi Produktivitas Dengan Metode Fishbone Di Perusahaan Percetakan Kemasan Pt. X. Jurnal Teknik Industri HEURISTIC, 11(1), 27–46.
Nazaruddin, N. (2022). Implementation of Quality Improvements to Minimize Critical to Quality Variations in Polyurethane Liquid Injection Processes. Journal of Applied Engineering and Technological Science (JAETS), 3(2), 139–148.
Nazaruddin, N., & Septiani, W. (2021). Risk Mitigation Production Process on Wood Working Line Using Fuzzy Logic Approach. SITEKIN: Jurnal Sains, Teknologi Dan Industri, 19(1), 100–108.
Reksohadiprodjo, S. P. D., & Sudarmo, I. G. (1990). Manajement Produksi edisi Revisi. Yogyakarta: BPPE.
Rimantho, D., & Athiyah, A. (2019). Analisis Kapabilitas Proses untuk Pengendalian Kualitas Air Limbah di Industri Farmasi. Jurnal Teknologi, 11(1), 1–8.
Sambodo, H. F. (2017). Analisis Perencanaan Sistem Perawatan Mesin dengan Menggunakan Pendekatan Metode Reliability Centered Maintenance II (RCM II) dengan Model Age Replacement dan Interval Waktu Pemeriksaan (Studi Kasus : PT. Deltomed Laboratories ). Universitas Islam Indonesia, Rcm Ii, 182.
Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) Untuk Meminimumkan Cacat Kaleng Di PT. Maya Food Industries. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1, 1–6. https://doi.org/https://doi.org/10.55826/tmit.v1iI.6
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).