Perancangan Stasiun Kerja Proses Canting Berdasarkan Pendekatan Ergonomi
DOI:
https://doi.org/10.24014/jti.v8i1.16833Abstract
Batik Tulis Tengah Sawah merupakan salah satu UKM yang terdapat di Pacitan dan bergerak dalam bidang kerajinan batik tulis. Dalam proses produksi, pembatik melakukan proses canting dengan posisi duduk pada kursi pendek (dingklik) terbuat dari kayu tanpa sandaran punggung. Kompor yang digunakan untuk melelehkan malam berukuran kecil dan tidak terdapat meja untuk meletakkan kompor serta digunakan oleh 2 pembatik sehingga mengharuskan pembatik duduk serong menghadap gawangan dan menyebabkan pembatik duduk dengan keadaan sedikit membungkuk. Oleh karena itu, dibutuhkan perbaikan mengenai fasilitas kerja dan stasiun kerja proses canting. Tujuan dari penelitian ini adalah mengevaluasi postur kerja pembatik dan melakukan perancangan usulan stasiun kerja proses canting bagi pembatik. Penelitian ini dilakukan dengan lima tahap, yaitu penilaian level risiko postur kerja, perancangan usulan kursi pembatik, perancangan usulan meja kompor, perancangan usulan gawangan dan perancangan usulan stasiun kerja proses canting. Hasil dari penelitian ini adalah kursi pembatik dengan fitur sandaran punggung, busa duduk, sandaran tangan dan wadah tempat minum. Meja kompor digunakan untuk menambah ketinggian kompor dan gawangan untuk menyesuaikan dengan ketinggian pembatik ketika duduk di kursi pembatik. Serta perancangan stasiun kerja untuk menciptakan stasiun kerja lebih tertata dan memberikan kenyamanan pembatik selama proses canting sehingga dapat meminimasi postur tubuh membungkuk.References
Aliyu, U. Y., Tokan, A., Abur, B. T., & Bawa, M. A. (2014). Design and construction of a drafting table and chair using ergonomic Principles. International Journal of Multidisciplinary and Current Research, 2, 973-976.
Arifin, R., & Suryoputro, M. R. (2019). Perancangan stasiun kerja pebatik canting dengan pendekatan rrgonomi partsipatori (Studi kasus: Batik Putra Laweyan). TALENTA Conference Series: Energy & Engineering, 450-456.
Dimberg, L., Laestadius, J. G., Ross, S., & Dimberg, I. (2015). The changing face of office ergonomics. The Ergonomics Open Journal, 8, 38-56.
Ismaila, S. O., Musa, A. I., Adejuyigbe, S. B., & Akinyemi, O. D. (2013). Anthropometric design of furniture for use in tertiary institutions in Abeokuta, Southwestern Nigeria. Engineering Review, 33(3), 179-192.
Lindawati, L., & Mulyono, M. (2018). Evaluasi postur kerja pengrajin batik tulis Aleyya Batik di Yogyakarta. Journal of Public Health Research and Community Health Development, 1(2), 131-143.
Lop, N. S., Salleh, N. M., Zain, F. M., & Saidin, M. T. (2019). Ergonomic risk factors (ERF) and their association with musculoskeletal disorders (MSDs) among Malaysian construction trade workers: Concreters. International Journal of Academic Research in Business and Social Sciences, 9(9), 1269-1282.
McAtamney, L., & Hignett, S. (2000). Rapid entire body assessment (REBA). Applied Ergonomics, 31(2), 201-205.
Nurmianto, E. (2008). Ergonomi Konsep Dasar dan Aplikasinya. Jakarta: PT. Guna Widya.
Pangesti, D. P. H. (2018). Redesign Meja Pemotong Berdasarkan Simulasi Human Posture untuk Mengurangi Resiko Cedera Muskuloskeletal (Studi Kasus: IKM Tahu Sari Murni Mojosongo). Skripsi, Program Studi Teknik Industri, Fakultas Teknik, Universitas Sebelas Maret, Surakarta.
Pheasant, S. (2003). Bodyspace: Anthropometry, Ergonomics and the Design of Work. London: Taylor & Francis Group.
Smardzewski, J., Wilk, D., & Piróg, A. (2014). Evaluation of seat comfort of office armchairs: An impact of articulated seat support and gas spring. Drvna industrija, 65(3), 183-189.
Sutapa, I. K., Sutapa, I. N., & Susila, I. N. D. (2017). Implementation of active rest in participatory ergonomics decrease workload and women musculoskeletal complaints of parking in mall Ramayana Denpasar. International Journal of Life Sciences, 1(2), 48-54.
Wijaya, B. R. A., & Larasati, L. (2017, Maret). Perancangan dingklik rrgonomis untuk proses mencanting (Studi kasus Kelompok Batik Berkah Lestari). IENACO (Industrial Engineering National Conference) 2017, 27-33.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).