Analisis Kerusakan Mesin Sterilizer Pabrik Kelapa Sawit Menggunakan Failure Modes and Effect Analysis (FMEA)
DOI:
https://doi.org/10.24014/jti.v8i2.19179Abstract
Palm Oil Mill is an industry that processes Fresh Fruit Bunches into Crude Palm Oil. The processing is supported by the use of several production machines, one of them is a sterilizer machine that works to boil TBS. Damage to the sterilizer machine can reduce the level of productivity. To overcome the occurrence of such damage, it is necessary to analyze the damage that occurred. Damage analysis was carried out using the Failure Mode and Effect Analysis and Caused and Effect Diagram approaches. From the results of observations and interviews, there are 3 types of damage that often occur. Of the three damages, the type of error that needs to be corrected immediately is based on the value of the Risk Priority Number (RPN), namely damage to the leaky rubber packing door with an RPN value of 85.65. Meanwhile, other types of damage are Leaking Inlet Pipes and detached Aluminum Pipes which have RPN values of 52.48 and 28.9. Based on the analysis of the causes of damage to the rubber packing door, the company can make improvements to the maintenance system, use quality materials, training and socialization, budgeting costs, and monitoring work methods
References
Haq, I. S., Darma, A. Y., & Batubara, R. A. (2021). Penggunaan Metode Failure Mode and Effect Analysis (FMEA) dalam Identifikasi Kegagalan Mesin untuk Dasar Penentuan Tindakan Perawatan di Pabrik Kelapa Sawit Libo. Jurnal Vokasi Teknologi Industri (Jvti), 3(1), 41–47. https://doi.org/10.36870/jvti.v3i1.209
Maylor, H., & Turner, N. (2022). Project Management (5th ed., Vol. 7, Issue 2). Pearson Education Inc.
Nicholas, J. M., & Steyn, H. (2020). Project Management For Engineering, Business and Technology (6th ed.). Routledge.
Pangaribuan, J. F., Persat, A., Budiman, I., & Aloina, G. (2020). Identifikasi Penyebab Kerusakan dengan Pendekatan Failure Mode and Effect Analysis. Journal of Industrial and Manufacture Engineering (JIME), 4(November), 132–137.
Richards, G., & Grinsted, S. (2020). Praise for the Logistics and Supply Chain Toolkit. Kogan Page.
Samanta, M. (2019). Lean Problem Solving and QC Tools for Industrial Engineers (1st ed.). CRC Press.
Stamatis, D. H. (2018). Risk Management Using Failure Mode and Effect Analysis (FMEA). ASQ Quality Press.
Tarigan, P., Ginting, E., & Siregar, I. (2013). Perawatan Mesin Secara Preventive Maintenance Dengan Modularity Design Pada Pt. Rxz. Jurnal Teknik Industri FT USU, 3(3), 35–39.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).