Penerapan Lean Manufacturing di Sebuah Perusahaan Keramik
DOI:
https://doi.org/10.24014/jti.v8i2.19954Abstract
Agar dapat bersaing di pasar global, perusahaan manufaktur harus secara terus menerus mengeliminasi waste yang terjadi dalam proses produksinya. Lean manufacturing merupakan salah satu pendekatan yang dapat digunakan untuk mengidentifikasi dan mengurangi waste di perusahaan. Dalam paper ini, pendekatan lean manufacturing digunakan untuk mengurangi waste di lantai produksi perusahaan manufaktur keramik. Adanya waste di lantai produksi menyebabkan keterlambatan dalam memenuhi permintaan pelanggan. Pendekatan value stream mapping (VSM) digunakan untuk menemukan permasalahan pada aliran produk dan informasi, sedangkan process activity mapping (PAM) digunakan untuk mengklasifikasikan aktivitas secara detail disetiap proses. Dari penerapan VSM dan PAM semua aktivitas di lantai produksi diklasifikasikan menjadi tiga kategori. Kategori pertama value-added activity dengan total waktu 186,1 menit, necessary non-value-added activities adalah 2.723,64 menit, dan non-value-added activity adalah 1.410,26 menit. Dari ketiga kategori kegiatan tersebut didapatkan rasio value-added activity sebesar 4,31%. Dengan menggunakan analisis Pareto diketahui, persentase non-value-added activity yang paling signifikan terjadi di proses drying, printing, dan firing. Metode Ishikawa digunakan untuk menemukan akar penyebab waktu non-value-added activity antara lain keterlambatan penggantian komponen, Kurangnya pelatihan operator, tidak adanya pemeriksaan berkala kurangnya kesadaran operator. Metode 5W1H menemukan usulan perbaikan yang sesuai dengan menambahkan tugas kepada operator proses glazing. Beban kerja operator dihitung ulang menggunakan metode full-time equivalent (FTE) untuk menentukan jumlah operator. Hasil penelitian menunjukkan bahwa waktu value-added activity meningkat 3,57% menjadi 192,27 menit, dan necessary non-value-added activitiy menurun 1,32% menjadi 2.759,70 menit. Namun, waktu non-value-added activity mengalami penurunan sebesar 3,03% menjadi 1.367,56 menit dengan rasio value-added activity sebesar 4,46%.References
S. R. Shah and E. Naghi Ganji, “Lean production and supply chain innovation in baked foods supplier to improve performance,” Br. Food J., vol. 119, no. 11, pp. 2421–2447, 2017, doi: 10.1108/BFJ-03-2017-0122.
S. Nallusamy and M. A. Adil Ahamed, “Implementation of lean tools in an automotive industry for productivity enhancement - A case study,” Int. J. Eng. Res. Africa, vol. 29, no. March, pp. 175–185, 2017, doi: 10.4028/www.scientific.net/JERA.29.175.
Yadrifil, R. A. Pratama, and A. M. M. Rus, “Improvement recommendation to eliminate waste on the production process of line laminating door component with value stream mapping and waste assessment model method,” in AIP Conference Proceedings, 2020, vol. 2227, doi: 10.1063/5.0004213.
S. V. Buer, J. O. Strandhagen, and F. T. S. Chan, “The link between industry 4.0 and lean manufacturing: Mapping current research and establishing a research agenda,” Int. J. Prod. Res., vol. 56, no. 8, pp. 2924–2940, 2018, doi: 10.1080/00207543.2018.1442945.
G. L. Tortorella, R. Miorando, and G. Marodin, “Lean supply chain management: Empirical research on practices, contexts and performance,” Int. J. Prod. Econ., vol. 193, pp. 98–112, 2017, doi: 10.1016/j.ijpe.2017.07.006.
A. Deshkar, S. Kamle, J. Giri, and V. Korde, “ScienceDirect Mapping ( VSM ) for a plastic bag manufacturing unit .,” Mater. Today Proc., vol. 5, no. 2, pp. 7668–7677, 2018, doi: 10.1016/j.matpr.2017.11.442.
A. P. Chaple and B. E. Narkhede, “Value stream mapping in a discrete manufacturing: A case study,” Int. J. Supply Chain Manag., vol. 6, no. 1, pp. 55–67, 2017.
D. T. Setiyawan, P. Deoranto, and D. Peranginangin, “Production process analysis using value stream mapping at East Java sugarcane industry,” IOP Conf. Ser. Earth Environ. Sci., vol. 230, no. 1, 2019, doi: 10.1088/1755-1315/230/1/012057.
W. Kosasih, I. K. Sriwana, E. C. Sari, and C. O. Doaly, “Applying value stream mapping tools and kanban system for waste identification and reduction (case study: A basic chemical company),” IOP Conf. Ser. Mater. Sci. Eng., vol. 528, no. 1, 2019, doi: 10.1088/1757-899X/528/1/012050.
N. Yeen Gavin Lai, K. Hoong Wong, D. Halim, J. Lu, and H. Siang Kang, “Industry 4.0 Enhanced Lean Manufacturing,” Proc. 2019 8th Int. Conf. Ind. Technol. Manag. ICITM 2019, pp. 206–211, 2019, doi: 10.1109/ICITM.2019.8710669.
D. Rahmanasari, W. Sutopo, and J. M. Rohani, “Implementation of Lean Manufacturing Process to Reduce Waste: A Case Study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1096, no. 1, p. 012006, 2021, doi: 10.1088/1757-899x/1096/1/012006.
C. E. Pérez-Pucheta, E. Olivares-Benitez, H. Minor-Popocatl, P. F. Pacheco-García, and M. F. Pérez-Pucheta, “Implementation of lean manufacturing to reduce the delivery time of a replacement part to dealers: A case study,” Appl. Sci., vol. 9, no. 18, 2019, doi: 10.3390/app9183932.
D. Behnam, A. Ayough, and S. H. Mirghaderi, “Value stream mapping approach and analytical network process to identify and prioritize production system’s Mudas (case study: natural fibre clothing manufacturing company),” J. Text. Inst., vol. 109, no. 1, pp. 64–72, 2018, doi: 10.1080/00405000.2017.1322737.
I. W. R. Taifa and T. N. Vhora, “Cycle time reduction for productivity improvement in the manufacturing industry,” vol. 6, no. 2, pp. 147–164, 2019, doi: 10.22116/JIEMS.2019.93495.
N. Burney, O. Mohammed, and N. Al-Mussallam, “Productivity in manufacturing industries in Kuwait,” Econ. Internazionale / Int. Econ., vol. 59, no. 1, pp. 1–16, 2018.
M. R. Suryoputro, T. C. Ginanjar, and A. D. Sari, “Combining Time and Physical Workload Analysis on Cold Press Working Group for Operator Management in Manufacturing Company,” MATEC Web Conf., vol. 221, 2018, doi: 10.1051/matecconf/201822102007.
Y. Rachmuddin, D. S. Dewi, and R. S. Dewi, “Workload analysis for laboratory and sample house employees in mining industry using full-time equivalent,” Proc. Int. Conf. Ind. Eng. Oper. Manag., pp. 1979–1984, 2021.
S. I. Wahidi, S. R. W. Pribadi, T. W. Pribadi, N. L. A. Wardhana, and M. S. Arif, “Fixed Manpower Reduction Analysis to Reduce Indirect Cost of Ship Production,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1052, no. 1, p. 012048, 2021, doi: 10.1088/1757-899x/1052/1/012048.
M. Elbert, Lean production for the small company. 2018.
N. David, “Going lean,” Aust. J. Pharm., vol. 95, no. 1124, pp. 42–46, 2014, doi: 10.1097/01.jnn.0000358162.21072.ab.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).