Optimizing New Product Development in The Hijab Industry: A House of Risk Analysis on Marketing and Design Process
DOI:
https://doi.org/10.24014/jti.v10i1.28883Abstract
XYZ Company, a Micro, Small, and Medium Enterprise (MSME) based in Yogyakarta, specializes in producing hijabs but faces challenges in maintaining customer interest due to a misalignment between product designs and consumer preferences. To address this, the company actively engages in new product development (NPD), focusing on trend analysis and model innovation to cater to customer needs better. An essential part of minimizing risks during the NPD process involves evaluating and identifying potential pitfalls, particularly in marketing and design. This study employs the Hazard and Operability Review (HOR) method to assess risks systematically. Initial findings from HOR phase 1 reveal that inadequate competitor information (A3) leads to significant risks in competitor product identification (E3), contributing approximately 70.34% to the total Aggregate Risk Priority (ARP). Subsequently, in HOR phase 2, XYZ Company prioritizes ten mitigation actions, with conducting a comparative study of competitors' products (PA1) being the most critical, reflected by an ETDk value of 540.
Keywords: House of Risk (HOR), Hijab Fashion, Hijab Industry, New Product Development (NPD)
References
R. P. Sari and N. Asad, "New product development-processes in the fashion industry-Evidence from Indonesian Islamic fashion companies," Journal of Islamic Markerting, vol. 10 no. 3, pp. 689-708, 2019.
J. F. D. Almeida, D. C. Amaral and R. T. Coelho, "Innovative Framework to manage New Product Development (NPD) Integrating Additive Manufacturing (AM) and Agile Management," Procedia CIRP, pp. 128-133, 2021.
Y. H. Park, "A study of risk management and performance measures on new product development," Asian Journal on Quality, vol. 11 no. 1, pp. 39-48, 2010.
A. Hoppe, M. D. D. Barcellos, M. G. Perin, L. F. Jacobsen and L. Lahteenmaki, "Factors influencing consumers’ willingness to participate in new food product development activities," British Food Journal, vol. 120, pp. 1195-1206, 2018.
W. Souder and X. M. Song, "Contingent product design and marketing strategies influencing new product success and failure in U.S. and Japanese electronics firms," Journal of Product Innovation Management, vol. 14, pp. 21-34, 1997.
M. Hartati and A. Rahman, "Analisa Risiko Rantai Pasok Lopo Mandailing Kopidengan Pendekatan Sistem Traceability," Jurnal Teknik Industri, vol. 2, pp. 81-86, 2016.
M. Salavati, M. Tuyserkani, S. A. Mousavi, N. Falahi and F. Abdi, " Improving new product development performance by risk management," Journal of Business and Industrial Marketing, vol. 10, pp. 418-425, 2016.
L. P. Cooper, "A research agenda to reduce risk in new product development through knowledge management: a practitioner perspective," Journal of Engineering and Technology Management, vol. 20, pp. 117-140, 2003.
T. Abioye, O. Arogundade, S. Misra, A. Akinwale and O. Adeniran, "Towards Ontology-Based Risk Management Framework for Software Projects: An Empirical Study," Journal of software: Evolution and Process, 2020.
A. Fole, "Perancangan Strategi Mitigasi Risiko Pada Proses Bisnis CV. JAT Mengunakan Metode House of Risk," Journal of industrial Engineering Innovation, vol. 1, no. 2, pp. 54-64, 2023.
A. A. Puji and F. A. Yul, "HOR Model & AHP -TOPSIS untuk Pengelolaan Risiko Rantai Pasok Darah," Jurnal Teknik Indusri, vol. 7, pp. 15-18, 2021.
D. E. Basuki, W. N. Cahyo, D. Handayani, R. A. Apriani and R. N. Mukarim, "Combined Waste Assessment Model and Fuzzy-FMEA in Lean Six Sigma for Generating Waste Reduction Strategy: A Proposed Model," Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, vol. 25, no. 2, pp. 153-168, 2023.
R. A. Apriani, R. M. Jannah, D. E. Basuki and D. Handayani, "Penerapan Lean Six Sigma Untuk Peningkatan Kualitas Produk Glove Pada Area Produksi Line 18 Di PT. SGI," INTECOMS: Journal of Information Technology and Computer Science, vol. 6, no. 2, pp. 1170-1178, 2023.
M. F. Munawar, U. A. N. Aini, D. H. Novrido, R. M. Jannah, M. V. Syahanifadhel and A. ‘Azzam, "Analisis Perencanaan Produksi dan Quality Control Dompet Pria Menggunakan Metode MRP dan FMEA," Jurnal Teknik Industri, vol. 9, no. 2, pp. 362-370, 2023.
Z. Xu, Y. Dang, P. Munro and Y. Wang, "A data driven approach for constructing the component failure mode matrix for FMEA," Journal of Intelligent Manufacturing, pp. 249-265, 2020.
I. N. Pujawan and L. H. Geraldin, "House of Risk: a model for proactive supply chain risk management," Business Process Management Journal, vol. 15, pp. 953-967, 2009.
V. Aulia, "Fesyen Muslim dan Diplomasi Budaya Indonesia," Siyar Journal, vol. 01, pp. 3-20, 2021.
S. S. Madjid, "Analisis Peluang , Tantangan, dan Strategi Industri Halal di Indonesia (Pada Masa Pandemic Covid-19)," Jurnal Pilar: Jurnal Kajian Islam Kontemporer, vol. 13, 2022.
Badan Pusat Statistika Indonesia, "Jumlah Penduduk Menurut Agama," 2022. [Online].
Kementrian Agaman Republik Indonesia, "Jumlah Penduduk Menurut Agama," 2022. [Online]. Available: https://www.kemenag.go.id/.
Badan Perencanaan Pembangunan Daerah Provinsi Daerah, "Aplikasi Dataku Daerah Isimewa Yogyakarta," 2022. [Online].
M. H. Meyer and M. U. James, "The Product Family and the Dynamics of Core Capabilitiy," MIT Sloan Management Review, vol. 34, pp. 29-47, 1993.
A. C. Moreira, M. D. Luis and P. Silva, "A case study on FMEA-based improvement for managing new product development risk," International Journal of Quality and Reliability Management, vol. 38, pp. 1130-1148, 2021.
D. S. Dewi, B. Syairudin and E. N. Nikmah, "Risk management in new product development process for fashion industry: Case study in hijab industry," Procedia Manufacturing, vol. 4, pp. 383-391.
S. R. Annisa, N. Kartika and M. T. Syamsuddin, "Asesmen dan Mitigasi Risiko Operasional Dalam Proses New Product Development Pada Usaha Fesyen Yeppushop," Fakultas Ekonomi dan Bisnis, Universitas Airlangga, 2023.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).