Prevention of Musculoskeletal Disorder (MSDs) at Kakimoto House Japan Lumber Mill Using the Ovako Working Analysis System (OWAS) Method and Design of Work Facilities
DOI:
https://doi.org/10.24014/jti.v10i2.32102Abstract
The timber industry heavily relies on its workforce, making worker well-being and posture maintenance essential to prevent musculoskeletal disorders (MSDs) resulting from repetitive tasks, non-ergonomic environments, and constrained working conditions. MSDs significantly impact productivity and worker health, necessitating ergonomic interventions like the Ovako Work Analysis System (OWAS). This anthropometric method evaluates worker postures by categorizing body movements into intervals, focusing on the back, arms, and legs, and identifying postures that pose a high risk of injury. At Kakimoto House Japan, where manual material handling (MMH) is predominant, OWAS was applied to analyze and address workers' physical strain, ensuring comprehensive data collection through sufficiency testing. Data analysis using the 5th, 50th, and 95th percentiles provided valuable insights into posture distribution and workload impact. Implementing a new carriage design enabled workers to carry more wood with less effort, reducing physical strain and improving task efficiency. This ergonomic improvement highlights the potential for enhanced productivity and health outcomes in the timber industry.
Keywords: Ergonomic, OWAS,MSDs
References
D. Andrian and R. Renilaili, “Pengukuran Tingkat Risiko Ergonomi Dengan Menggunakan Metode Ovako Working Analysis System (OWAS) Untuk Mengurangi Risiko Muscoleskeletal,” Integr. J. Ilm. Tek. Ind., vol. 6, no. 1, p. 32, 2021, doi: 10.32502/js.v6i1.3793.
M. F. Fahmi and D. Widyaningrum, “Analisis Penilaian Postur Kerja Manual Guna Mengurangi Risiko Musculoskeletal Disorders (MSDS) Menggunakan Metode OWAS Pada UD. Anugrah Jaya,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, p. 168, 2022, doi: 10.24014/jti.v8i2.20027.
M. Imron, “Analisis Tingkat Ergonomi Postur Kerja Karyawan Di Laboratorium Kcp Pt. Steelindo Wahana Perkasa Dengan Metode Rapid Upper Limb Assessment (Rula), Rapid Entire Body Assessment (Reba) Dan Ovako Working Posture Analisys (Owas),” JITMI (Jurnal Ilm. Tek. dan Manaj. Ind., vol. 2, no. 2, p. 147, 2020, doi: 10.32493/jitmi.v2i2.y2019.p147-153.
Ahmad Afandy and Asep Endih Nurhidayat, “Pengukuran risiko musculoskeletal disorders pada kegiatan manual material handling menggunakan metode SOFI dan OWAS di PT. XYZ,” JENIUS J. Terap. Tek. Ind., vol. 3, no. 2, pp. 90–102, 2022, doi: 10.37373/jenius.v3i2.306.
Nukhe Andri Silviana, Chalis Fajri Hasibuan, and M. Fauza Rizkyansyah, “Design of Work Facilities to Reduce Complaints of Musculoskeletal Disorders (MSDS) with an Ergonomic Approach to Coffee Farmers,” Int. J. Heal. Eng. Technol., vol. 1, no. 2, pp. 58–62, 2022, doi: 10.55227/ijhet.v1i2.17.
Robino Indan, Nila Kusuma Pratiwi, and Mufrida Meri.Z, “Analisis Postur Kerja Karyawan di bagian Pengangkatan Bahan Baku dengan Menggunakan Metode Owas (Ovako Working Posture Analysis) dan Rula (Rapid Upper Limb Asessement) di PT.Sumatera Tropical Spices,” Maj. Ilm. UPI YPTK, no. 26, pp. 36–44, 2019, doi: 10.35134/jmi.v26i2.52.
D. N. Parto, A. Y. Wong, and L. Macedo, “Prevalence of musculoskeletal disorders and associated risk factors in canadian university students,” BMC Musculoskelet. Disord., vol. 24, no. 1, pp. 1–11, 2023, doi: 10.1186/s12891-023-06630-4.
M. Ramadhani, D. Prayogo, D. D. Ayu P, C. Author, and A. “Assessment Analysis of Ergonomics Work Posture on Wheel Installation With Ovako Work Posture Analysis System (OWAS) Method AND Rapid Entire Body Assesment (REBA) Method Preventing Musculoskeleal Disorders AT Perum PPD Jakarta,” IOSR J. Humanit. Soc. Sci. (IOSR-JHSS, vol. 23, no. 10, pp. 1–11, 2018, doi: 10.9790/0837-2310030111.
A. J. S. Aquino, R. B. Batucal, and E. D. Pangilinan, “Redesign of supermarket check-out counter using ovako working posture analysis system (Owas) and rapid entire body assessment (reba),” Proc. Int. Conf. Ind. Eng. Oper. Manag., pp. 746–757, 2021, doi: 10.46254/an11.20210143.
C. Lins, F. Quang, R. Schulze, S. Lins, A. Hein, and S. Fudickar, “An Android App for Posture Analysis Using OWAS,” vol. 5, no. Biostec, pp. 307–313, 2023, doi: 10.5220/0011668300003414.
P. Murarka and M. Kaur Chauhan, “Posture Analysis of ‘CFA: pharmaceutical distribution,’ workers using OWAS,” Int. J. Interdiscip. Res. Innov., vol. 9, no. 1, pp. 16–23, 2021.
M. R. Randany and I. Masrofah, “Analisis sistem kerja dan postur tubuh pekerja karyawan bagian gudang penyimpanan beras menggunakan metode owas,” J. Semin. Konf. Nasioanl IDEC 2021, pp. 1–10, 2021, [Online]. Available: https://idec.ft.uns.ac.id/wp-content/uploads/IDEC2021/PROSIDING/LPSKE/ID020.pdf
J. A. Biasi, R. V. Branquinho, and R. E. Catai, “Ergonomic Analysis of the Activity of Dough Preparation Assistant in a Paper Industry,” Rev. Ação Ergonômica, vol. 16, no. 1, pp. 1–13, 2022, doi: 10.4322/rae.v16e202203.en.
T. Chatterjee, S. Mazumder, S. Gangopadhyay, T. Ghorai, and A. Samanta, “Postural strain of spinner and casting workers of a small-scale aluminium utensil making factory,” Int. J. Community Med. Public Heal., vol. 10, no. 2, pp. 740–745, 2023, doi: 10.18203/2394-6040.ijcmph20230231.
D. Kee, “Systematic Comparison of OWAS, RULA, and REBA Based on a Literature Review [Comparación sistemática de OWAS, RULA y REBA basada en una revisión de literatura],” Int. J. Environ. Res. Public Health, vol. 19, no. 1, pp. 1–23, 2022, [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122140884&doi=10.3390%2Fijerph19010595&partnerID=40&md5=d82ba1234e12245ceaca6664ad48a16b
P. Kerja, “Pengukuran Postur Kerja Operator Pengisian Tawas Menggunakan Metode Ovako Work Posture Analysis System ( Owas ) Di Perusahaan Daerah Air Minum ( Pdam ) Tirta Meulaboh,” vol. 9, no. 2, 2023.
Z. K. M. Makhbul, M. S. Shukor, and A. A. Muhamed, “Ergonomics workstation environment toward organisational competitiveness,” Int. J. Public Heal. Sci., vol. 11, no. 1, pp. 157–169, 2022, doi: 10.11591/ijphs.v11i1.20680.
E. N. Hayati, M. R. Radyanto, F. A. Ekoanindiyo, and E. Prihastono, “Portable Coolbox Design for Milk Storage,” J. Appl. Eng. Technol. Sci., vol. 4, no. 1, pp. 561–567, 2022, doi: 10.37385/jaets.v4i1.1337.
R. Prabowo and A. Agung, “Disain Alat Ukur Antropometri Melalui Integrasi Metode Kansei Engineering Dan Quality Function Deployment,” Tekmapro J. Ind. Eng. Manag., vol. 14, no. 2, pp. 60–67, 2019, doi: 10.33005/tekmapro.v14i2.54.
A. (2018). Hidjrawan, Y., & Sobari, “Analisis Postur Kerja Pada Stasiun Sterilizer Dengan Menggunakan Metode Owas Dan Reba,” J. Optim., vol. 4, no. 1, pp. 1–10, 2018.
A. N. Bintang and S. K. Dewi, “Analisa Postur Kerja Menggunakan Metode OWAS dan RULA,” J. Tek. Ind., vol. 18, no. 1, pp. 43–54, 2017, doi: 10.22219/jtiumm.vol18.no1.43-54.
F. Z. Yanto and S. Sutrisno, “Analisis Postur Tubuh Operator pada Saat Bekerja Menggunakan Metode Ovako Working Analysis System (OWAS),” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 7, no. 3, p. 283, 2023, doi: 10.30998/string.v7i3.14748.
K. F. Hafeze and F. A. Ekoanindiyo, “Design Of Portable Lawn Mower Using Rapid Entire Body Assessment (Reba) Method,” J. Sains dan Teknol. Ind., vol. 21, no. 1, p. 28, 2023, doi: 10.24014/sitekin.v21i1.23103.
C. Virry, C. Aprillova, and F. A. Ekoanindiyo, “Development of a Semi-Automatic Banana Chip Slicing Machine for Reducing Musculoskeletal Disorders in Workers,” vol. 10, no. 1, pp. 1–6, 2024.
A. Yohanes and F. A. Ekoanindiyo, “Desain Konseptual Bottle Capping Machine Dengan Metode Anthropometri,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 23, no. 1, p. 1, 2023, doi: 10.36275/stsp.v23i1.525.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).