Aplikasi Lean Six-Sigma untuk Mengurangi Pemborosan di Bagian Packaging Semen
DOI:
https://doi.org/10.24014/jti.v6i1.9525Abstract
Observasi pada penelitian ini menunjukan adanya pemborosan di bagian pengepakan semen dan adanya produk cacat kemasan. sehingga banyak semen tercecer mengakibatkan pengulangan proses pengepakan terjadi. Penelitian ini dilakukan untuk mengidentifikasi pemborosan pada proses pengepakan menggunakan pendekatan lean manufacturing dengan value stream mapping. untuk tingkat kualitas, penelitian ini menggunakan dengan metode six-sigma. Penyebab kecacatan produk dianalisis dengan fish-bone diagram. lebih lanjut, Failure Mode and Effect Analysis (FMEA) digunakan untuk merancang ususlan perbaikan. hasil penelitian ini menunjukan adanya Pemborosan pada transportation, motion, waiting, over processing, dan defect. Usulan perbaikan dilakukan dengan penggabungan stasiun penimbangan dan stasiun pemeriksaan, sehingga memberikan estimasi peningkatan effisiensi dari 39.1% menjadi 46.69%.
References
Gaspersz, Vincent, Balanced Scorecard dengan Six Sigma, Gramedia, Jakarta, 2002.
Gaspersz dan Fontana, (2017). “Lean Six Sigma for Manufacturing and Service Industries”. Bogor : Vinchristo Publication.
Hadisupriyanto, H, (2014). Penerapan Lean Six Sigma Concept Untuk Perbaikan Lini Produksi, Prosiding Seminar Nasional IENACO – 2014, 120–126, 2014,
Hill, J., Thomas, A. J., Mason-Jones, R. K., & El-Kateb, S., (2018). The implementation of a Lean Six Sigma framework to enhance operational performance in an MRO facility. Production and Manufacturing Research, Vol. 6, No. 1, pp 26–48.
Khalil, M., & Pambudi, T.,( 2014). Implementasi Lean Six Sigma dalam Peningkatan Kualitas Dengan Mengurangi Produk Cacat NG DROP di mesin Final Test Produk HL 4.8 di PT. SSI, Jurnal PASTI, Vol. VIII, No.1, pp 14–29.
Martim, J. W. Operational Excelence Using Lean Six Sixma to Translate Customer Value through Global Supply Chains, Auerbach Publications Taylor and Francis Group, New York, 2008.
Montgomery, D. C. (2009). Introduction To Statistical Quality Control (sixth edition), John Wiley & Son, 2009.
Oppenheim, B. W.,(2011). Lean for Systems Engineering with Lean Enablers for Systems Engineering. In Lean for Systems Engineering with Lean Enablers for Systems Engineering.
Pradana, A. P., Chaeron, M., & Khanan, M. S. A., (2018). Implementasi Konsep Lean Manufacturing Guna Mengurangi Pemborosan Di Lantai Produksi. Opsi, Vol. 11, No. 1, pp. 14.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).