USULAN PERBAIKAN KESELAMATAN KERJA UNTUK MEMINIMALKAN KECELAKAAN KERJA DENGAN PENDEKATAN JOB SAFETY ANALYSIS (JSA) PADA AREA LANTAI PRODUKSI DI PT. ALAM PERMATA RIAU
DOI:
https://doi.org/10.24014/sitekin.v13i1.1292Keywords:
frequency rate severity rate safety scor, and job safety analysisAbstract
PT. Alam Permata Riau is a company that pays little attention to safety. Where in work activities are always accompanied by a potential hazard that could cause accidents at work. This study aims to determine the statistical value of workplace accidents by using Frequency Rate, Severity Rate, and Safety Score, identifying the types of occupational accidents in the production process, identifying factors that could potentially pose a hazard to workers, and propose improvements that need to be taken to minimize workplace accidents PT. Alam Permata Riau with Job Safety Analysis approach. Methodology used in this research is secondary data from the company, direct observation, and identification of occupational accidents. identification using a work accident frequency rate, severity rate, and use safety scor. The survey results revealed that the highest frequency rate was in 2014 as many as 289 accident severity rate is the highest value in 2009 sebabyak 267 days, and the safety scor show that the state of K3 PT. Riau Natural jewel in good condition with a value <= -2.00. Accidents at PT. Riau Natural jewel is caused by not wearing personal protective equipment at the time of the work, and the company should provide infrastructure K3 then conduct safety audits by the JSA against work accidents in order to reduce occupational accidents in the company.
References
Anjani, Merysa dkk. “Pengaruh Keselamatan dan Kesehatan Kerja Terhadap Kinerja Karyawan PT. International Power Mitsui Operation and Maintenance Indonesia”. halaman 3-4. Fakultas Ilmu Administrasi, Universitas Brawijaya, Malang. 2014.
Budiyanti, Erlin. “Penerapan Inspeksi Keselamatan dan Kesehatan Kerja dalam Usaha Pencegahan Kecelakaan Kerja di PT. Coca-Cola Bottling Indonesia”. halaman 32-37 Fakultas Kedokteran Universitas Sebelas Maret, Surakarta. 2009.
Hamdi, Rizwan. “Analisis Tingkat Pemenuhan Safeti Inspection di Tinjau dari International Rating Sistem PT. Indocement Tunggal Perkasa Tbk”. halaman 25-30. Cirebon, Jawa Barat. 2009.
Husein, Torik., dan Andriyanto, Fandihery. “Menilai Pelaksanaan Sistem Manajemen K3 Kerja pada Perusahaan PT. ZAI yang telah Memiliki Sertifikat Internasional OHSAS 18001”. halaman 50-54. Jurusan Teknik Industri Universitas Mercu Buana, Jakarta. 2009.
Kusuma, Ibrahim Jati., dan Darmastuti, Ismi. “Pelaksanaan Program Keselamatan dan Kesehatan Kerja Karyawan PT. Bitratex Industries Semarang”. halaman 40-57. Fakultas Ekonomi Universitas Diponegoro, Semarang.. 2010.
Maisyaroh, Siti. “Implementasi Job Safety Analysis sebagai Upaya Pencegah Kecelakaan Kerja di PT. Tri Polyta Indonesia Tbk”. halaman 6-12. Fakultas Kedokteran Universitas Sebelas Maret, Surakarta. 2010.
Pandie, J.M. Helda., dan Berek, Noorce. “Hubungan Karekteristik Tenaga Kerja dan Faktor Pekerjaan dengan Kecelakaan Kerja di Perusahaan Meubel Kayu Kelurahan Oesapa Kota Kupang”. halaman 37-38. Fakultas Kesehatan Masyarakat, Kupang. 2007.
Romadiaty, Ferraz., dan Nurmianto, Eko. “Evaluasi Penerapan Prosedur Operasional Sistem Manajemen Keselamatan dan Kesehatan Kerja”. halaman 100-104. Jurusan Teknik Industri, Institit Teknologi Sepuluh September, Surabaya. 2011.
Suhartini. “Kesehatan Dan Keselamatan Kerja pada PT. Metro Abdi Bina Sentosa”. halaman 17-20 Jurusan Teknik Industri, Institit Teknologi Adhi Tama Surabaya, Surabaya. 2013.
Suma’mur. “Keselamatan Kerja dan Pencegahan Kecelakaan”. halaman 1-13. CV. Haji Masagung, Jakarta. 1989.
Wardani, Dwi Kusuma. “Pengaruh Sikap Pengetahuan Keselamatan Kerja dan Iklim Keselamatn Kerja Terhadap Perilaku Keselamatan pada Karyawan Produksi PT. Semen Indonesia”. halaman 19-23. Fakultas Pendidikan Psikologi, Universitas Negeri Malang, Malang. 1999.
Wuon, Alfred. “Analisis Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja di PT. Kerismas Witikco Makmur”. halaman 1-2. Fakultas Kesehatan Masyarakat Universitas Sam Ratulangi, Manado. 2013.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.