Peningkatan Karakteristik Kualitas PKO Menggunakan Metodologi Six Sigma
DOI:
https://doi.org/10.24014/sitekin.v19i1.14911Abstract
PT. REA Kaltim Plantations & Group merupakan perusahaan yang mengolah buah kelapa sawit menjadi minyak kelapa sawit (CPO) dan minyak inti sawit (PKO). Kualitas PKO (Palm Kernel Oil) dinilai oleh beberapa karakteristik kualitas yang menjadi ukuran mutu PKO (Palm Kernel oil), yaitu FFA (Free Fatty Acid) atau asam lemak bebas, moisture yaitu kadar air, dan dirt atau kotoran. Berdasarkan produksi PKO pada bulan Agustus 2020 sampai Juli 2021 didapatkan nilai rata-rata presentase terhadap reject secara berurutan untuk FFA adalah 2.12%, kadar air adalah 0.25%, dan pada kadar kotoran sebesar 0.024%. Melalui metode Six Sigma dengan prosedur DMAIC diharapkan dapat meningkatkan kualitas dengan cara mengurangi reject pada produksi Palm Kernel Oil (PKO). Berdasarkan hasil penelitian, nilai sigma dari tiap karakteristik kualitas, yaitu FFA semula ialah 2.98 dan setelah dilakukan improve sebesar 3.27, sementara moisture semula ialah 2.03 dan setelah dilakukan improve sebesar 2.26.References
Alfikri, G., Luh, N., & Hariastuti, P. (2019). Peningkatan Kualitas Minyak Kelapa Sawit dengan Pendekatan Lean Six Sigma-(Studi Kasus di PT. Sawit Mas Parenggean). Jurnal IPTEK, 23, 47–54.
Fatimah, Sayuti, M., & Pertiwi, E. P. (2018). Quality control of palm kernel oil using Individual Moving Range (I-MR) chart. MATEC Web of Conferences, 204, 1–11.
Mangoensoekarjo, S., & Semangun, H. (2008). Manajemen Agrobisnis Kelapa Sawit. Gadjah Mada University Press.
PRAWIRO, I. S., KUSRINI, N., & NURLIZA, N. (2017). ANALISIS PENGENDALIAN MUTUCPO (Crude Palm Oil) MENGGUNAKAN SIX SIGMA DI PABRIK PENGOLAHAN CPOPT. GUNAJAYA KARYA GUMILANG KECAMATAN KENDAWANGAN KABUPATEN KETAPANG. Jurnal Social Economic of Agriculture, 5(2), 28.
Rantawi, A. B., Mahfud, A., & Situmorang, E. R. (2017). Korelasi Antara Kadar Air pada Kernel Terhadap Mutu Kadar Asam Lemak Bebas Produk Palm Kernel Oil Yang Dihasilkan ( Studi Kasus pada PT XYZ ). Industrial Engineering Journal, 6(1), 36–42.
Sofiyanurriyanti, Putra, G., & Arifin, A. R. (2021). Quality control of palm oil crude (CPO) using six sigma method in PT Karya Tanah Subur West Aceh regency. IOP Conference Series: Materials Science and Engineering, 1072(1), 012052.
Yunggo, J., Murhadi, & Hidayati, S. (2016). PENGARUH WAKTU REAKSI ETANOLISIS PADA SUHU RUANG TERHADAP RENDEMEN DAN STABILITAS EMULSI PRODUK ETANOLISIS Palm Kernel Oil (PKO). Jurnal Teknologi Industri & Hasil Pertanian, 21(2).
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
