Usulan Konsep Design Ergoclass Menggunakan Evaluasi Cognitive Failure Questionnare dan DirecRT (Studi Kasus: Jurusan Matematika UIN SUSKA RIAU)
DOI:
https://doi.org/10.24014/sitekin.v19i1.15012Abstract
The classroom is one of the important factors in supporting lecturing activities. There are several facilities in the class which support the success of student learning processes namely chairs, tables, and blackboards as display aid in the lecturing. Mathematics UIN SUSKA Riau’s classroom does not currently consider cognitive ergonomics. This can be seen from complaints experienced by students while using facilities in the class. The purpose of this study is to improve the classroom considering cognitive ergonomics. This study used the CFQ method to determine the level of cognitive failure of students. Students are provideed with a test using the PEBL software to determine the reaction time speed in short-term memory and long-term memory. Based on this method, the student's cognitive failure rate is at moderate and high levels. As many as 65.5% of students are at moderate cognitive failure rates and 32.2% of students are at a high level of cognitive failure. The suggested design of the classroom is in the form of facilities design and an addition of a stage in front of the class, also a board with size based on the level of cognitive failure, complaints and anthropometry of students. The results of the study are expected to improve cognitive and student body posture, so the lecturing process can support the need of the students.
Keyword: Antropomentric, classroom facilities, Cognitive Ergonomics
References
Desrianty, Arie., Caecilia, SW., dan Stephanie, Maria., Evaluasi Performansi Pegawai Itenas Berdasarkan Kemampuan Kognitif dan Psikomotor, Jurnal Online Institute Teknologi Nasional, 02(01), 2014, pp. 180-188
Harris, Don., Engineering Psychology and Cognitive Ergonomics, proceedings of The 7th International Conference Held as Part of HCI, Cranfield University, 2007, pp. 16-23
Irvan, M., Sinambela, Sahat., dan Hermanto., Usulan Rancangan Ukuran Pada Meja dan Kursi Lipat Belajar Yang Ergonomis Untuk Rumah Petak di Jakarta, Jurnal Teknologi, 1(2), 2017, pp. 9-15
Ishlah, Dinda Utami., dan Harianda, Johanna Renny Oktavia., Perancangan Kursi dan Meja Laptop Yang Ergonomis, Jurnal Rekayasa Sistem Industri, 2(1), 2013, pp. 1-11
Liansari, Gita Permata., Wahyuning, Caecilia Sri., dan Indrawan, Ferri., Evaluasi Performansi Kognitif Kru Darat II Bandung Dengan Menggunakan Cognitive Failures Questionnare dan DirectRT, Jurnal Online Institut Teknologi Nasional, 2(4), 2014, pp. 401-411
Matlin, Margaret W., Cognitive, Harakindo Publishing, New York, 2016
Matondang, Zulkifli., Validitas dan Reliabilitas Suatu Instrumen Penelitian, Jurnal Tabularasa PPS UNIMED, 1(6), pp. 87-97
Mozer, Michael C., and Pashler, Harold., When Does Fading Enchance Perceptal Category learning, Journal of Ekperimental Psychology: Learning, Memory, and Cognition, 10 (13), pp. 1-12
Nugroho, Mahendra Adhi., Rahmawati, Diana., dan Djazari, M., Pengaruh Sikap Menghindari Risijo Sharing dan Knowledge Self-Efficacy Terhadap Informal Knowledge Sharing Pada Mahasiswa FISE UNY, Jurnal Nominal, 2(2), 2013, pp. 181-209
Schulte, Axel., and Onken, Reiner., System Ergonomic Design of Cognitive Automation, Polish Academy Of Science, Polandia, 2010
Suhadri, Bambang., Perancangan Sistem Kerja dan Ergonomi Industri, Direktorat Pembinaan Sekolah Menengah Kejuruan, Jakarta, 2008
Susanto, Bambang., Setiawan, Adi., dan Kabasarang, Dian Christiani., Uji Normalitas Dengan Menggunakan Statistik Jarque-Bera, Prosiding SEMDIKMAD, Universitas Kristen Satya Wacana, 2012, pp. 39-49
Widiastuti, Retno., Studi Ergonomi Kognitif Untuk Mengetahui Penurunan Produktivitas Kerja Akibat Kenaikan Tingkat Kebisingan, Jurnal Teknologi, 4(2), 2011, pp. 137-144
Widyastuti, Naniek., Sholeh, Mohammad., dan Putra, Zahreza Fajar Setiara., Analisa Kualitas Layanan Website BTKP-DIY Menggunakan Metode WEBQUAL 4.0, Jurnal Jaringan Komputer, 1(2), 2014, pp. 174-184
Wignjosoebroto, Sritomo., Ergonomi Studi Gerak dan Waktu: Teknik Analisis Untuk Peningkatan Produktivitas Kerja, Prima Printing, Surabaya, 2008
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
