Strengthening the Competitiveness of SMEs after the Covid 19 Pandemic (Case Study: Producers of Luti Gendang)
DOI:
https://doi.org/10.24014/sitekin.v20i1.19314Abstract
Due to the Covid-19 pandemic, many SMEs in Indonesia have been hit hard. Whereas SMEs is a sector that has a major contribution to the Indonesian economy. In addition to the incentives provided by the government for the recovery of SMEs, they are also required to innovate and come up with new strategies in an effort to increase their competitiveness after the Covid 19 Pandemic. To accommodate this, the diamond's porter model was developed as a trigger for formulating strategies to strengthen SMEs competitiveness. The results of the study determine 3 factors of SME competitiveness including production factors, demand conditions factors, and supporting industry factors by 11 indicators. The production factor is the factor with the highest weight (0.4), meaning that it is the most important than the other 2 factors in increasing competitiveness. Of the 30 strategy formulations for SMEs X, there are 2 superior strategies that can be carried out by SMEs X, they are creating customer trust through brand characteristics (0.007) and maintaining consistency in the quality of supply of raw materials in order to produce consistent quality (0.0066). These two strategies can be a concern for SMEs X in increasing its competitiveness Post-Pandemic Covid 19.References
T. T. H. Tambunan, “Kebijakan Industri Dalam Menyongsong ME-ASEAN 2015,” Policy Pap. Tim Act. Kadin Indones., no. 16, 2013.
H. K. S. H. Athapaththu, “An Overview of Strategic Management: An Analysis of the Concepts and the Importance of Strategic Management,” Int. J. Sci. Res. Publ., vol. 6, no. 2, p. 127, 2016, [Online]. Available: www.ijsrp.org.
R. K. Gautam and R. Singh, “Competitive Perception of Small Indian Manufacturers: A study of Punjab Units,” J. Compet., vol. 2011, no. 3, pp. 27–40, 2011.
W. Wiyadi, “Pengukuran Indeks Daya Saing Industri Kecil Menengah (IKM) di Jawa Tengah,” J. Siasat Bisnis, vol. 13, no. 1, pp. 77–92, 2009, doi: 10.20885/jsb.vol13.iss1.art6.
Z. Molamohamadi, N. Ismail, Z. Leman, and N. Zulkifli, “Supplier Selection in a Sustainable Supply Chain,” J. Adv. Manag. Sci., no. May 2019, pp. 278–281, 2013, doi: 10.12720/joams.1.3.278-281.
M. E. Porter, The Competitive Advantage of Nations, vol. 17, no. 1. 1990.
D. Priastuti, A. I. Suroso, and M. Najib, “Analisis Strategi Peningkatan Daya Saing Sayuran Organik,” Manaj. dan Organ., vol. V, no. 3, pp. 259–271, 2014.
I. A. Dhelia, R. Oktaviani, and B. H. Iskandar, “Strategi Peningkatan Daya Saing Industri Bandeng Di Kabupaten Indramayu,” J. Ekon. Kebijak. Publik, vol. 3, no. 1, pp. 67–82, 2018.
L. A. Rustian and T. Widiastuti, “Daya Saing Usaha Mikro Kecil : Modifikasi Porter Diamond Model,” J. Ilm. Aset, vol. 22, no. 2, pp. 147–158, 2020, doi: 10.37470/1.22.2.169.
G. S. A. Putra and N. Maulana, “Strategi Meningkatkan Daya Saing Industri Kreatif Indonesia: Studi Kasus Pengembangan Klaster Industri Alas Kaki Kecamatan Tamansari, Bogor,” Ultim. Manag., vol. 10, no. 2, pp. 97–109, 2019, doi: 10.31937/manajemen.v10i2.825.
E. Winarti, D. Purnomo, and J. Akhmad, “Analisis Faktor-Faktor Yang Mempengaruhi Daya Saing Usaha Mikro Kecil Dan Menengah (UMKM) Di Perkampungan Industri Kecil (PIK) Pulogadung Jakarta Timur,” J. Lentera Bisnis, vol. 8, no. 2, p. 38, 2019, doi: 10.34127/jrlab.v8i2.319.
S. R. Bintari and L. Setiartiti, “Pengukuran Daya Saing Usaha Mikro Kecil Dan Menengah Menyongsong Masyarakat Ekonomi Asean,” J. Ekon. dan Stud. Pembang., vol. 14, no. 2, pp. 153–162, 2013.
M. T. Febriyantoro and D. Arisandi, “Pemanfaatan Digital Marketing Bagi Usaha Mikro, Kecil Dan Menengah Pada Era Masyarakat Ekonomi Asean,” JMD J. Ris. Manaj. Bisnis Dewantara, vol. 1, no. 2, pp. 61–76, 2018, doi: 10.26533/jmd.v1i2.175.
A. N. Listyawan, Pengaruh modal usaha. Yogyakarta: Pustaka Pelajar, 2011.
Ismawati, A. Wibisono, and R. Yuniastri, “Seminar Nasional Karya Pengabdian Penerapan Teknologi Dalam Peningkatan Kapasitas Produksi UMKM UD Maju Jaya Sumenep,” Semin. Nas. Karya Pengabdi. Fak. Pertan. Univ. Muhammadiyah Mataram, pp. 1–7, 2020.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
