USULAN DESAIN SPRAY AERATOR PADA WASTE WATER TREATMENT PLANT PT INDOFOOD CBP SUKSES MAKMUR, TBK PALEMBANG
DOI:
https://doi.org/10.24014/sitekin.v14i1.2018Keywords:
Diffuser, Spray Aerator, Aeration, Design, InvestationAbstract
One of the problems in the waste treatment process of PT Indofood is the aeration proces. The active sludge is in the aeration basin serves as a medium for living bacteria mesophyll. Activated sludge is often attached to the diffuser. This diffuser serves as a conduit of oxygen to the aeration basin. Because of this, PT Indofood must replace the diffuser 36 annually. The Price of one diffuser is Rp 2.500.000,00, so every year PT Indofood must pay Rp 90,000,000.00 only for diffuser. Based on these facts, we propose to design of economical spray aerator that has the same function as a diffuser that exists today as a provider of oxygen to the aeration basin.The design of the proposed spray aerator has a height of 3m pipe with a diameter of 1.5 inch diameter hole in each pipe of 7.5 mm, has 1146 holes with a distance of 2.6 cm each hole and a pressure of 70 kPa capable of minimizing the expenses of Rp 884,885,640.00.Proposed draft spray aerator has a payback period of 31 days to the break even point (BEP) of Rp 13,674,502.00, and the value of average rate of return (ARR) of 94.11%, and the net present value (NPV) of Rp 4,610 .617.872,00, so that the investment project for the installation of spray aerator well done.References
Ahmad. Kamaruddin, Dasar-dasar manajemen investasi, Edisi Revisi. Rineka Cipta, Jakarta, 2004.
Bahri. Samsul, dkk., Perkembangan Desain dan Kinerja Aerator Tipe Kincir,. Technical Paper JTEP Vol. 28, No. 1, April 2014, Institut Pertanian Bogor, Bogor, 2014.
Riduan. M, Pengaruh Aliran Debit Proses Terhadap Hasil TSS di Bak Clear Well pada PT Indofood Cbp Sukses Makmur TBK. Cabang Palembang, Laporan Kerja Praktik,. Universitas Taman Siswa, Palembang, 2014.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.