Analysis of Service Quality Using Service Quality and IPA Methods at XYZ Cafes

Authors

  • Faris Aulia Dwi Setyo
  • Deny Andesta

DOI:

https://doi.org/10.24014/sitekin.v20i2.21751

Abstract

XYZ Cafe is an MSME business in Gresik Regency with a target market of teenagers and surrounding office employees. Cafe management evaluates cafe services for consumer complaints, which decreases the number of cafe visitors. Service quality is essential in marketing current products so that products can be well received in the market. The method used to determine the quality of service is service quality while determining the service attributes that need to be improved using the importance-performance analysis method. The quality of service provided by the XYZ Gresik cafe is based on service quality. From the results of the IPA analysis, the results of quadrants I, II, have relatively high demand, and quadrants III, IV, have relatively low demand with a relatively high level of satisfaction, so it is considered excessive. And from the GAP calculation results using the service quality method has a negative value.

References

D. Oleh, N. No, and P. A. Fajarini, “Peningkatan Kualitas Layanan Dengan Metode Service Quality Dan Pendekatan Importance Performance Analysis ( Ipa ) ( Studi Kasus : Lynn Hotel Yogyakarta ) Tugas Akhir Diajukan Sebagai Salah Satu Syarat Untuk Memperoleh Gelar Sarjana Strata-1 Pada Jurusan T,” 2019.

N. Nusaputra, M. Choiri, and L. T. W. N. Kusuma, “Analysis of Quality Improvement Services Workshop by Using SERVQUAL, IPA, AND PGCV Index Methods (Case Study in PT. Astra International Tbk-Daihatsu Branch Office Malang),” J. Rekayasa dan Manaj. Sist. Ind., vol. 3, no. 6, pp. 1239–1250, 2021.

F. S. Lubis, A. P. Rahima, M. I. H. Umam, and M. Rizki, “Analisis Kepuasan Pelanggan dengan Metode Servqual dan Pendekatan Structural Equation Modelling (SEM) pada Perusahaan Jasa Pengiriman Barang di Wilayah Kota Pekanbaru,” SITEKIN J. Sains, Teknol. dan Ind., vol. 17, no. 1, pp. 25–31, 2020.

M. Hamzah, A. Purwati, A. Jamal, S. Sutoyo, and M. Rizki, “An Analysis of Customer Satisfaction and Loyalty of Online Transportation System in Pekanbaru, Indonesia,” 2021, doi: 10.1088/1755-1315/704/1/012029.

A. Efendi, M. Rizki, F. S. Lubis, and M. I. Hadiyul, “An Analysis of the Crispy Mushroom Business For Small And Medium-Sized Enterprises (SMEs) In Indonesia,” 2022.

M. Rizki et al., “Aplikasi Metode Kano Dalam Menganalisis Sistem Pelayanan Online Akademik FST UIN SUSKA Riau pada masa Pandemi Covid-19,” ejournal.uin-suska.ac.id, vol. 18, no. 02, pp. 180–187, 2021, Accessed: May 30, 2022. [Online]. Available: http://ejournal.uin-suska.ac.id/index.php/sitekin/article/view/12710.

M. Jazuli, D. Samanhudi, and Handoyo, “Analisis Kualitas Pelayanan dengan Servqual dan Importance Performance Analysis di PT. XYZ,” Juminten J. Manaj. Ind. dan Teknol., vol. 01, no. 01, pp. 67–75, 2020.

A. Anastasya and F. Yuamita, “Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. I, pp. 15–21, 2022, doi: https://doi.org/10.55826/tmit.v1iI.4.

A. S. M. Absa and S. Suseno, “Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. III, pp. 183–201, 2022.

L. M. M. Ramdani, A. Z. Al Farity, and A. Z. Al Faritsy, “Analisis Pengendalian Kualitas Pada Produksi Base Plate R-54 Menggunakan Metode Statistical Quality Control Dan 5S,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 85–97, 2022.

P. Priyono and F. Yuamita, “Pengembangan Dan Perancangan Alat Pemotong Daun Tembakau Menggunakan Metode Quality Function Deployment (QFD),” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. III, pp. 137–144, 2022.

A. A. Muis, D. Kurniawan, F. Ahmad, and T. A. Pamungkas, “Rancangan Meja Pengatur Ketinggian Otomatis Menggunakan Pendekatan Antropometri Dengan Metode Quality Function Deployment (QFD),” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 114–122, 2022.

N. M. W. Karuniati and I. A. P. W. Sugianingrat, “Pengaruh Citra Koperasi dan Kualitas Pelayanan terhadap Kepuasan Nasabah Koperasi Amertha Dana Lestari di Badung,” Widya Amrita, vol. 1, no. 1, pp. 394–411, 2021, doi: 10.32795/widyaamrita.v1i1.1188.

Fadhli Khotim & Pratiwi Nia Dwi, “Pengaruh Digital Marketing, Kualitas Produk, Dan Emosional,” Pengaruh Digit. Mark. Kualitas Produk, Dan Emosional Terhadap Kepuasan Konsum. Zio Jombang, vol. 2, no. 1, pp. 470–479, 2021.

M. Ibrahim and S. M. Thawil, “Pengaruh Kualitas Produk Dan Kualitas Pelayanan Terhadap Kepuasan Konsumen,” J. Ris. Manaj. dan Bisnis Fak. Ekon. UNIAT, vol. 4, no. 1, pp. 175–182, 2019, doi: 10.36226/jrmb.v4i1.251.

C. Hosen, A. D. Ekawati, and A. Maharani, “Factors affecting Total Quality Management Implementation on Service Industry: A Systematic Literature Review,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 7, no. 2, pp. 84–90, 2021.

R. Rahmawati, “Analisis True Customer Needs Produk Raja Menggunakan Model Kano Dan Quality Function Deployment Pada Umkm Tiu Ramata Di Kabupaten Sumbawa,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 324–334, 2022.

M. Putry, “Aplikasi Metode Kano Berdasarkan Dimensi Service Quality Untuk Mengukur Kepuasan Pelanggan Pada Hotel X,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 355–361, 2022.

E. A. Perwira, A. Suseno, and R. Fitriani, “Pengendalian Mutu Part Accu 12v dan Kaca Anti Peluru Kendaraan Komodo Nexter dengan Metode Quality Control Circle,” J. Tek. Ind. J. Has. Penelit. Dan Karya Ilm. Dalam Bid. Tek. Ind., vol. 7, no. 1, pp. 54–62, 2021.

D. Diniaty, F. Hanum, and M. I. Hamdy, “Analisis Pengendalian Mutu (Quality Control) CPO (Crude Palm Oil) pada PT. XYZ,” J. Tek. Ind, vol. 5, no. 2, pp. 92–99, 2019.

S. Silvia, G. Y. B. Munthe, and D. Diniaty, “Analisis Quality Control Koreksi Blending BBM Jenis Premium dan Pertalite,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 6, no. 1, pp. 8–13.

A. Wibisono and , S., “Pengaruh Kualitas Jasa Pelayanan Terhadap Kepuasan Pelanggan,” Perform. “ J. Bisnis Akuntansi,” vol. 6, no. 2, p. 32, 2016, doi: 10.24929/feb.v6i2.268.

M. Muiz, N. Rachma, and A. R. Slamet, “Pengaruh Sales Promotion dan Kualitas Pelayanan Terhadap Minat Pembelian Ulang di Mediasi Variabel Kepuasan Konsumen (Survei pada Konsumen GrabBike Online di Kota Malang),” J. Ris. Manaj., vol. 08, pp. 186–199, 2019.

S. Variabel, I. Pada, U. D. Eva, and G. Mataram, “AVEVA group,” Process Eng., vol. 83, no. SUPPL., p. 19, 2002.

A. R. Magriza, D. Andesta, and H. Hidayat, “Analisis Kualitas Pelayanan Terhadap Jasa Perbaikan Teknik Pada P.T Ravana Jaya Dengan Metode Service Quality,” J. Serambi Eng., vol. 7, no. 4, 2022, doi: 10.32672/jse.v7i4.4829.

Downloads

Published

2023-02-13

Issue

Vol. 20 No. 2 (2023): June 2023

Section

Articles

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

 

Copyright Notice

An author who publishes in the SITEKIN Journal agrees to the following terms:

  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  • Author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.