Risk Analysis of Musculoskeletal Disorders Using RWL And LI Methods
DOI:
https://doi.org/10.24014/sitekin.v20i2.21854Abstract
Material handling is an activity that is often carried out by everyone in daily activities, especially in activities in a company. Material transfer or material handling without the use of tools, commonly referred to as "manual material handling," can affect a production process in the company. At PT. X, there is a manual material handling activity with a total load of 23 kg, namely taking water treatment analysis samples. This study's goal is to make a recommendation for changing how employees behave at work when taking samples for water treatment analysis. In completing this study, the methods used were the Recommende Weight Limit (RWL) and Lifting Index (Li) methods. according to the results of the recommended weight limit method's calculations, the recommended load weight was obtained with an average weight of 8 kg and was known. And based on Li's calculations, the value of Li > 1 was obtained, It indicates that there is a potential of spinal injury during the activity. So it is necessary to make improvements using manual tools or layout improvements to make it more effective and efficient.References
C. Reese, Material Handling Systems: Designing for Safety and Health, Florida: CRC Press, 2000.
Tarwaka, ERGONOMI INDUSTRI: DASAR-DASAR PENGETAHUAN ERGONOMI DAN APLIKASI DI TEMPAT KERJA, 2nd ed., Surakarta: Harapan Press, 2015.
A. Afandy and A. E. Nurhidayat, "Pengukuran risiko musculoskeletal disorders pada kegiatan manual material handling menggunakan metode SOFI dan OWAS di PT. XYZ," JENIUS: Jurnal Terapan Teknik Industri, vol. 3, no. 2, pp. 90-102, 2022.
Arianto, E. Suhendar and Hermanto, "Analisis Perbaikan Beban Kerja untuk Meminimalisir Tingkat Kecideraan Teknisi PT Raja Ampat Indotim dengan Metode RWL, CVL, dan Mannequin," SURYA TEKNIKA, vol. 9, no. 2, pp. 539-546, 2022.
M. I. Hamdy, M. Nur, A. Mas'ari and F. E. Suheri, "Analisa Postur Kerja Manual Material Handling (MMH) pada Karyawan Bagian Pembuatan Block Menggunakan Metode Rapid Upper Limb Assessment (RULA) (Studi Kasus: PT Asia Forestama Raya)," Jurnal Teknik Industri, vol. 5, no. 1, pp. 62 - 65, 2019.
A. Hanif, "HUBUNGAN ANTARA UMUR DAN KEBIASAAN MEROKOK DENGAN KELUHAN MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJAANGKAT ANGKUT UD MAJU MAKMUR KOTA SURABAYA," MTPH Journal : Medical Technology and Public Health Journal, vol. 4, no. 1, pp. 7 - 15, Maret 2020.
A. Khoryanto, P. Yanuar and F. J. Haniyah, "ANALISIS RECOMMENDED WEIGHT LIMIT (RWL) DAN LIFTING INDEX (LI) PADA FREKUENSI KEGIATAN PENGANGKATAN PROSES PERACIKAN PT. AKASHI WAHANA INDONESIA," NCIET : National Conference of Industry, Engineering and Technology, vol. 3, pp. 267-278, 2022.
N. Margaretha, "ANALISIS KEGIATAN MANUAL MATERIAL HANDLING TERHADAP GEJALA MUSCULOSKELETAL DISORDER PADA OPERATOR GUDANG," Jurnal Indonesia Sosial Sains, vol. 3, no. 2, pp. 167-190, 2022.
M. Noviandy, "ANALISIS PENGANGKATAN CPU DI WM GAME CENTER DENGAN METODE RECOMMENDED WEIGHT LIMIT (RWL) DAN CHAFFIN ANDERSON," Jurnal Ilmiah Teknik Industri, vol. 7, no. 3, pp. 199 - 204, 2019.
P. T. Rahayu, M. E. Setiyawati, C. Arbitera and A. A. Amrullah, "Hubungan Faktor Individu dan Faktor Pekerjaan terhadap Keluhan Musculoskeletal Disorders pada Pegawai," Jurnal Kesehatan, vol. 11, no. 3, pp. 449-456, 2020.
R. A. Ratriwardhani, "ANALISA AKTIVITAS PENGANGKATAN DENGAN METODE RECOMMENDED WEIGHT LIMIT (RWL)," MTPH Journal : Medical Technology and Public Health Journal, vol. 3, no. 1, pp. 94 - 100, 2019.
S. Shobur, Maksuk and F. I. Sari, "FAKTOR RISIKO MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA TENUN IKAT DI KELURAHAN TUAN KENTANG KOTA PALEMBANG," Medikes (Media Informasi Kesehatan), vol. 6, no. 2, pp. 113 - 122, 2019.
A. Tjahayuningtyas, "FAKTOR YANG MEMPENGARUHI KELUHAN MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA INFORMAL," IJOSH: The Indonesian Journal of Occupational Safety and Health, vol. 8, no. 1, pp. 1 - 10, Maret 2019.
T. T. Widodo, Sanusi and J. P. Nugraha, "Perancangan Alat Bantu Kerja Pengangkatan Barang di Gudang Ace Hardware Dengan Metode Rapid Entire Body Assessment (REBA) dan Recommended Weight Limit (RWL)," Jurnal Teknik Ibnu Sina (JT-IBSI), vol. 6, no. 2, pp. 1-15, 2021.
S. Salsabila, R. A. Wibowo, S. Thania and K. W. Prastha, "Analisis Manual Material Handling Pengangkatan Beras dengan Metode Lifting Index di Toko XYZ," Seminar dan Konferensi Nasional IDEC, vol. 08, pp. 1-11, 2022.
Abdurahman and E. B. Sulistiarini, "Studi tentang Aspek Ergonomi pada Pengetesan Dispersi Divisi Quality Control di PT. XYZ," Universitas Widyagama Malang, Ciastech, pp. 347-354, 2019.
D. P. Mayangsari, S. Sunardi and T. Tranggono, "Analisis Risiko Ergonomi Pada Pekerjaan Mengangkat di Bagian Gudang Bahan Baku PT.AAP dengan Metode Niosh Lifting Equation," JUMINTEN, vol. 1, no. 3, pp. 91-103, 2020.
Imron and Mochamad, "Analisis Tingkat Ergonomi Postur Kerja Karyawan di Laboratorium KCP PT. Stelindo Wahana Perkasa dengan Metode Rapid Upper Limb Assessment (RULA)," Jurnal Teknik Industri, vol. 2, no. 2, 2019.
D. Lesmana, "Beban Kerja Tubuh Manusia menggunakan Metode Recommended Weight Limit (RWL) dan Lifting Index (LI)," Jurnal Teknologi, pp. Vol. 12 No. 1 Hal: 22-27, 2022.
A. Rohimi, A. Rahayu, I. Efendy and W. Puspita, "Analisis Pengangkatan Beban Box Minyak Goreng Pada Pekerja Indomaret," Bulletin of Applied Industrial Engeneering Theory, vol. 2, no. 1, 2021.
A. Rahman, D. Djafri and V. Triana, "The Risk Assessment of Occupational Safety Using Job Safety analysis (JSA) at PT. P&P Lembah Karet Padang," KnE Life Sciences, vol. 4, no. 10, 2019.
T. Dahniar and D. B. Leksonowati, "Analisa Postur Kerja Karyawan Bagian Pick Up di Pt. Jalur Nugraha Eka kurir (Jne) Cabang Kayon, Cinere dengan Metode Niosh," Teknologi: Jurnal Ilmiah dan Teknologi, vol. 1, no. 2, p. 103, 2019.
A. Chegini, R. Ghousi, H. S. Naeini and K. Karuppiah, "Developing a New Vertical Multiplier to Modify the Revised NIOSH Lifting Equation," Internasional Journal of Occupational Hygiene, vol. 12, no. 2, 2020.
K. T. Sanjaya, N. H. Wirawan and B. Adenan, "Analisis Postur Kerja Manual Material Handling Menggunakan Biomekanika dan NIOSH," Jati Unik, pp. Vol. 1, No. 2, Hal 70-80, 2018.
D. Gumilang and K. D. Ananto, "Perbaikan Postur Kerja Dengan Menggunakan Metode RULA dan RWL untuk Meminimalkan Gangguan Musculoskeletal Disorders di PT. XYZ," INAQUE: Journal of Industrial & Quality Engineering, vol. 10, no. 1, pp. 13-35, 2022.
N. Salsabila and E. Muslimah, "ANALISIS MANUAL MATERIAL HANDLING DAN POSTUR KERJA PADA BAGIAN PACKING MENGGUNAKAN METODE NIOSH MULTITASK DAN REBA DI PT. SARI WARNA ASLI V KUDUS," Simposium Nasional RAPI, pp. 73-79, 2022.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
