Efforts to Control Work Accident Risks in Steel Construction Work Using the Job Safety Analysis (JSA) Method. (Case Study at PT. Xyz)
DOI:
https://doi.org/10.24014/sitekin.v20i2.22166Abstract
PT. XYZ is a PT engaged in general contracting, outsourcing, trading and services. In the company there are several workers who had work accidents. According to existing data for 2021-2022 in fabrication work, most accidents are related to negligence of workers at PT. XYZ, namely in the grinding process from being cut to tripping over cables, so the authors conducted this research aiming to reduce and minimize work accidents of workers in the workplace. This research was conducted by measuring accidents in every activity at PT. XYZ. Data processing is done by calculating the level of risk assessment, then determining the level of efficiency to be achieved using the Job Safety Analysis (JSA) method. The results of the risk assessment for each job show that there is one highest level of risk, namely in the drilling section with a likelihood value of three and a severity level of four. From the results of risk control in the fabrication process, it can be carried out by means of technical control (repairing or adding technical equipment such as installation Occupational Health and Safety signs), administrative control (briefing before work, using special tools to lift materials), and using PPE. Proposed improvements that can be given are the addition of several personal protective equipment suitable for work at the fabrication site, namely the use of gloves, wearing masks, gloves, safety shoes and welding goggles. From the results of risk control in the fabrication process, it can be carried out by means of technical control (repairing or adding technical equipment such as installing K3 signs), administrative control (briefing before work, using special tools to lift material), and using PPE. Proposed improvements that can be given are the addition of several personal protective equipment suitable for work at the fabrication site, namely the use of gloves, wearing masks, Occupational Health, and Safety signs), administrative control (briefing before work, using special tools to lift materials), and using PPE. Proposed improvements that can be given are the addition of several personal protective equipment suitable for work at the fabrication site, namely the use of gloves, wearing masks, gloves, safety shoes and welding goggles.
References
C. Pokphand, P. Martino, DI Rinawati, and R. Rumita, "Analysis of Occupational Accident Hazard Identification Using Job Safety Analysis (JSA) with the Hazard Identification, Risk Assessment and Risk Control (HIRARC) Approach," 2013.
MR Jannah, S. El Unas, and MH Hasyim, "On the Case Study of the Tower X Development Project in Jakarta (Risk Analysis of Occupational and Safety Using the HIRADC Approach and Job Safety Analysis Method in the Case Study of Tower Project X in Jakarta),"Tech. Civil, p. 9, 2014.
S. Case, PT Tamora, and A. Lestari, "Identification of Hazards, Occupational Accident Risks and Proposals for Improvements Using the Job Safety Analysis (Jsa) Method," vol. X, pp. 42–52, 2022.
A. Rahayu, HM Kholik, and DP Restuputri, "Efforts to Reduce Human Error in Work Accidents Using Sherpa and Jsa Methods at Perum Perhutani KBM - Gresik Wood Industry,"J.Tek. ind., vol. 16, no. 2, p. 53, 2017, doi: 10.22219/jtiumm.vol16.no2.53-62.
LY Prastowo, AS Wahyuningsih, and I. Article, “HIGEIA JOURNAL OF PUBLIC HEALTH,” vol. 4, no. Special 1, pp. 1–12, 2020.
D. Fathezia Ariani, "Factors Associated with Occupational Accidents in Workers in the Production Section of Pt Abaisiat Raya Padang City in 2022," 2020.
N. Rosdiana, SK Anggraeni, and A. Umyati, "Identification of Occupational Accident Risks in the Bridge Project Production Area Using the Job Safety Analysis (JSA) Method," vol. 5, no. 1, pp. 1–6, 2017.
K. Kunci, “Scientific Journal of Health,” vol. 20, no. 2, pp. 58–65, 2021.
Saloni Waruwu, "Analysis of occupational health and safety (K3) factors that significantly affect work accidents in student castle apartment development projects," no. November, 2021, doi: 10.12928/si.v14i1.3705.
P. Marfiana, HK Ritonga, and M. Salsabiela, "Implementation of Job Safety Analysis (JSA) as an Effort to Prevent Work Accidents,"J. Migasian, vol. 3, no. 2, pp. 25–32, 2019.
TN Asih, "E-ISSN: 2621-8933 JUSTI (Journal of Systems and Industrial Engineering)," 2018.
R. Alfatiyah, "Analysis of occupational safety and health risk management using the hierarchical method for casting section work," vol. 11, no. 2, pp. 88–101, 2017.
AZ Abidin and NA Mahbubah, "Construction Worker Risk Mapping Based on the Job Safety Analysis Method at PT BBB," vol. VI, no. 3, pp. 2111–2119, 2021.
Y. Ilmansyahet al., “IMPLEMENTATION OF JOB SAFETY ANALYSIS AS AN EFFORT,” vol. 8, no. 1, 2020.
A. Levi, "Proposed Work Safety Improvements Using Job Safety Analysis (Jsa) And Failure Mode And Effect Analysis (FMEA) methods," pp. 151–167, 2017.
P. Sukapto, H. Djojosubroto, and H. Permana, “Application of the Job Safety Analysis and Risk Score Method to Improve Occupational Safety and Health in the Printing, Sewing and Assembly Departments of PT. PAI, Bandung (A Participatory Ergonomic Approach),"J. Health., vol. 9, no. 3, p. 403, 2018, doi: 10.26630/jk.v9i3.994.
S. Ramli, “SMART Safety”.
S. Silvia, C. Balili, and F. Yuamita, "Analysis of Mechanical Accident Risk Control in the Ampana Power Plant Project (2x3 Mw) Using the Job Safety Analysis (JSA) Method," vol. 1, no. 13, pp. 61–69, 2022.
J. Bawang, PA T Kawatu, R. Wowor, and F. Public Health at Sam Ratulangi University ABSTRACT, "Analysis of Potential Hazards Using the Job Safety Analysis Method at the Shipping Site Pakal PT. Aneka Tambang Tbk. UBPN North Maluku,"J. HEALTH, vol. 7, no. Vol. 7No. 5 (2018): Volume 7, Number 5, September 2018, pp. 1–15, 2018.
M. David and Heri Tri Irawan, “Analysis of Potential Hazards in the Palm Oil Processing Process at PT. Karya Tanah Subur Using Job Safety Analysis (JSA),”J. Inotera, vol. 8, no. 1, pp. 20–26, 2023, doi: 10.31572/inotera.vol8.iss1.2023.id200.
A. Firdaus and F. Yuamita, "Efforts to Prevent Occupational Accidents in the Grading Process of Palm Oil Tbs at PT. Sawindo Kencana Using the Job Safety Analysis (JSA) Method,”J. Technol. and Manaj. ind. therapy., vol. 1, no. 3, pp. 155–162, 2022, doi: 10.55826/tmit.v1iiii.40.
AU Abidin and I. Ramadhan, "Application of Job Safety Analysis, Knowledge of Occupational Safety and Health on Occupational Accidents in Higher Education Laboratories,"J. Berk. healthy., vol. 5, no. 2, p. 76, 2019, doi: 10.20527/jbk.v5i2.7827.
Putra F, Maniyani A, and Climateaturriza M, "Journal of Industrial Engineering,"J.Tek. ind., vol. 2, no. 1, pp. 51–57, 2021.
H. Journal, A. Permana, and AJ Nugroho, "Scientific Journal of Mechanical, Electrical and Computer Engineering Job Safety Analysis (Jsa) in the Pt Widya Inovasi Indonesia Workshop Area,"J. Ilm. Tech. Machines, Electrical, and Computers., vol. 2, no. 1, pp. 63–73, 2022.
F. Setiabudi and A. Bhaskara, "Analysis Of Jsa And Ibprp Based On Permen PUPR No. 21 YEAR Case Study: Beam Structure Work on Learning Service Building Construction Project, Faculty of Social and Political Science, Jenderal Soedirman University Analysis Of Jsa And Ibprp Based On Regulation Of The Minister Of PUPR No. 21 of 2019 Case Study: Block Structure Work in the Learning Service Building Project of the Faculty of ISIP, Jenderal Soedirman University," no. 21, pp. 4–6, 2019.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
