Design of A Portable Trainer Simulation of Coal Distribution and Boiler Water Control Process in PLTU Based on PLC
DOI:
https://doi.org/10.24014/sitekin.v19i2.22452Abstract
The purpose of this research is to simulate the coal distribution process using a conveyor and water regulation in the boiler whose program is made using PLC-based CX-Programmer software. The first method used in the conveyor work process is to install several lights and 2 motors on each conveyor as many as 5 conveyors are connected with a timing belt as an indicator that the conveyor is working. The second method used in the simulation of water regulation in the boiler is almost the same as the conveyor system, namely by installing several motors and lights as indicators of the boiler working, as well as adding a high/medium/low sensor to adjust the water level. The conveyor and boiler systems work automatically using PLC devices that have been programmed through the CX-Programmer. In the 3-phase (reverse-forward) motor load test, the following data were obtained: PLC input voltage is 224 Volts, V line voltage is 396 Volts, motor input voltage is 398 Volts, and motor current is 1,6 Ampere. The result of this research are used as additional measurable equipment in the energy conversion laboratory which previously amounted to 2 test equipment into 3 test equipment.References
J. Możaryn, “PLC based fractional-order PID temperature control in pipeline: design procedure and experimental evaluation,” Meccanica, vol. 56, no. 4, pp. 855–871, 2021, doi: 10.1007/s11012-020-01215-0.
K. Gu, “Tryptophan improves porcine intestinal epithelial cell restitution through the CaSR/Rac1/PLC-?1 signaling pathway,” Food Funct., vol. 12, no. 18, pp. 8787–8799, 2021, doi: 10.1039/d1fo01075a.
L. Poudyal, “Mechanical and durability properties of portland limestone cement (PLC) incorporated with nano calcium carbonate (CaCO3),” Materials (Basel)., vol. 14, no. 4, pp. 1–19, 2021, doi: 10.3390/ma14040905.
T. Klopot, “Practical PLC-Based Implementation of Adaptive Dynamic Matrix Controller for Energy-Efficient Control of Heat Sources,” IEEE Trans. Ind. Electron., vol. 68, no. 5, pp. 4269–4278, 2021, doi: 10.1109/TIE.2020.2987272.
H. N. Noura, “Efficient and robust data availability solution for hybrid PLC/RF systems,” Comput. Networks, vol. 185, 2021, doi: 10.1016/j.comnet.2020.107675.
D. Yuzbekova, “On the mechanisms of nucleation and subsequent development of the PLC bands in an AlMg alloy,” J. Alloys Compd., vol. 868, 2021, doi: 10.1016/j.jallcom.2021.159135.
Z. Hu, “The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting,” Mater. Charact., vol. 178, 2021, doi: 10.1016/j.matchar.2021.111198.
A. K. Padhan, “RIS Assisted Dual-Hop Mixed PLC/RF for Smart Grid Applications,” IEEE Commun. Lett., vol. 25, no. 11, pp. 3523–3527, 2021, doi: 10.1109/LCOMM.2021.3104630.
G. Liu, “Tryptophan Ameliorates Barrier Integrity and Alleviates the Inflammatory Response to Enterotoxigenic Escherichia coli K88 Through the CaSR/Rac1/PLC-γ1 Signaling Pathway in Porcine Intestinal Epithelial Cells,” Front. Immunol., vol. 12, 2021, doi: 10.3389/fimmu.2021.748497.
M. Zhu, “Human embryo polarization requires plc signaling to mediate trophectoderm specification,” Elife, vol. 10, 2021, doi: 10.7554/eLife.65068.
Z. F. Chen, “Genomic-Wide Analysis of the PLC Family and Detection of GmPI-PLC7 Responses to Drought and Salt Stresses in Soybean,” Front. Plant Sci., vol. 12, 2021, doi: 10.3389/fpls.2021.631470.
P. Grelewicz, “Increment Count Method and Its PLC-Based Implementation for Autotuning of Reduced-Order ADRC with Smith Predictor,” IEEE Trans. Ind. Electron., vol. 68, no. 12, pp. 12554–12564, 2021, doi: 10.1109/TIE.2020.3045696.
J. Hajda, “Security challenges in industry 4.0 plc systems,” Applied Sciences (Switzerland), vol. 11, no. 21. 2021. doi: 10.3390/app11219785.
A. Ayub, “Empirical Study of PLC Authentication Protocols in Industrial Control Systems,” Proceedings - 2021 IEEE Symposium on Security and Privacy Workshops, SPW 2021. pp. 383–397, 2021. doi: 10.1109/SPW53761.2021.00058.
C. O. Wong, “Regulation of longevity by depolarization-induced activation of PLC-β-IP3R signaling in neurons,” Proc. Natl. Acad. Sci. U. S. A., vol. 118, no. 16, 2021, doi: 10.1073/pnas.2004253118.
W. El Sayed, “The effect of emi generated from spread-spectrum-modulated sic-based buck converter on the g3-plc channel,” Electron., vol. 10, no. 12, 2021, doi: 10.3390/electronics10121416.
P. Pal, “IoT-Based Real Time Energy Management of Virtual Power Plant Using PLC for Transactive Energy Framework,” IEEE Access, vol. 9, pp. 97643–97660, 2021, doi: 10.1109/ACCESS.2021.3093111.
N. G. Emenogu, “On the volatility of daily stock returns of Total Nigeria Plc: evidence from GARCH models, value-at-risk and backtesting,” Financ. Innov., vol. 6, no. 1, 2020, doi: 10.1186/s40854-020-00178-1.
A. Camponogara, “Physical Layer Security of In-Home PLC Systems: Analysis Based on a Measurement Campaign,” IEEE Syst. J., vol. 15, no. 1, pp. 617–628, 2021, doi: 10.1109/JSYST.2020.2999487.
M. Jani, “On the Performance of a Cooperative PLC-VLC Indoor Broadcasting System Consisting of Mobile User Nodes for IoT Networks,” IEEE Trans. Broadcast., vol. 67, no. 1, pp. 289–298, 2021, doi: 10.1109/TBC.2020.2989621.
M. H. Rais, “JTAG-based PLC memory acquisition framework for industrial control systems,” Forensic Sci. Int. Digit. Investig., vol. 37, 2021, doi: 10.1016/j.fsidi.2021.301196.
S. Cavalieri, “Asset Administration Shell for PLC Representation Based on IEC 61131-3,” IEEE Access, vol. 8, pp. 142606–142621, 2020, doi: 10.1109/ACCESS.2020.3013890.
M. Jani, “Performance Analysis of a Mixed Cooperative PLC-VLC System for Indoor Communication Systems,” IEEE Syst. J., vol. 14, no. 1, pp. 469–476, 2020, doi: 10.1109/JSYST.2019.2911717.
A. Saleh, “Essential Role of Sperm-Specific PLC-Zeta in Egg Activation and Male Factor Infertility: An Update,” Frontiers in Cell and Developmental Biology, vol. 8. 2020. doi: 10.3389/fcell.2020.00028.
A. Ghosh, “A novel automata and neural network based fault diagnosis system for PLC controlled manufacturing systems,” Comput. Ind. Eng., vol. 139, 2020, doi: 10.1016/j.cie.2019.106188.
S. Aboagye, “Design of Energy Efficient Hybrid VLC/RF/PLC Communication System for Indoor Networks,” IEEE Wirel. Commun. Lett., vol. 9, no. 2, pp. 143–147, 2020, doi: 10.1109/LWC.2019.2946144.
A. A. M. Picorone, “Channel characterization of low voltage electric power distribution networks for PLC applications based on measurement campaign,” Int. J. Electr. Power Energy Syst., vol. 116, 2020, doi: 10.1016/j.ijepes.2019.105554.
B. Masood, “Investigation of deterministic, statistical and parametric NB-PLC channel modeling techniques for advanced metering infrastructure,” Energies, vol. 13, no. 12, 2020, doi: 10.3390/en13123098.
J. Zhang, “Wnt-PLC-IP3-Connexin-Ca2+ axis maintains ependymal motile cilia in zebrafish spinal cord,” Nat. Commun., vol. 11, no. 1, 2020, doi: 10.1038/s41467-020-15248-2.
W. Fu, “17β-Estradiol Inhibits PCSK9-Mediated LDLR Degradation Through GPER/PLC Activation in HepG2 Cells,” Front. Endocrinol. (Lausanne)., vol. 10, 2020, doi: 10.3389/fendo.2019.00930.
J. F. Liu, “Thrombospondin-2 stimulates MMP-9 production and promotes osteosarcoma metastasis via the PLC, PKC, c-Src and NF-κB activation,” J. Cell. Mol. Med., vol. 24, no. 21, pp. 12826–12839, 2020, doi: 10.1111/jcmm.15874.
L. Han, “Inhibition of RELM-β prevents hypoxia-induced overproliferation of human pulmonary artery smooth muscle cells by reversing PLC-mediated KCNK3 decline,” Life Sci., vol. 246, 2020, doi: 10.1016/j.lfs.2020.117419.
Y. Ouberri, “Design of a robust sliding mode controller for MPPT based on automation PLC for PV applications,” Int. Trans. Electr. Energy Syst., vol. 30, no. 4, 2020, doi: 10.1002/2050-7038.12296.
J. Myeong, “Phosphatidylinositol 4,5-bisphosphate is regenerated by speeding of the PI 4-kinase pathway during long PLC activation,” J. Gen. Physiol., vol. 152, no. 12, 2020, doi: 10.1085/JGP.202012627.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
