Design of a Manure Smelting Machine Using a 1 HP DC Electric Motor, Using a V-Belt

Authors

  • Galih Muji Tri Sutrisno Universitas Nahdlatul Ulama Sunan Giri

DOI:

https://doi.org/10.24014/sitekin.v21i1.23189

Abstract

This plan is used to create working design drawings for the construction of a reliable, durable, safe, and effective livestock dung smelter machine, as well as to get the performance test results and economic analysis of the dung smelter. There are three different ways to phrase the issue in relation to the three planning goals. The design of a livestock manure crusher machine is done in stages, including task planning and explanation, product idea planning, and design. Technical examination examines torque, power generated by the shaft, and frame design. Due to the design of a manure smelter with SOP sizes of P 107 cm, L 27 cm, and H 124 cm, an electric motor with a power capacity of 900 to 1300 watts is intended to be used for the propulsion of the animal dung crushing machine. The machine must be able to produce 300 kg per hour of driving source DC electric motor, which is equivalent to 1 horsepower. engines' power The transmission system, which uses a V-belt and a driving shaft with a diameter of 3 cm, is what powers the engine. The 2.0 mm thick plate used in the frame construction rotates at 1400 RPM and is formed of 6 mm canal iron and tubes

References

Dewan Ketahanan Pangan, “Kebijakan Umum Ketahanan Pangan 2006 – 2009,” Gizi dan Pangan, vol. 1, no. 1, pp. 57–63, 2009.

A. Mulyaningsih, A. V. S. Hubeis, and D. Sadono, “Partisipasi petani pada usahatani padi, jagung, dan kedelai perspektif gender,” J. Penyul., vol. 14, no. 1, pp. 145–158, 2018, doi: 10.25015/penyuluhan.v14i1.18546.

D. K. Anwar, M. F. R. P, H. Kifli, I. M. Ridha, P. P. Lestari, and H. Wulandari, “Kombinasi Limbah Pertanian dan Peternakan sebagai Alternatif Pembuatan Pupuk Organik Cair Melalui Proses Fermentasi Anaerob,” Pros. Semin. Nas. Teknoin 2008 Bid. Tek. Kim., pp. 95–100, 2008.

B. Sharma, B. Vaish, Monika, U. K. Singh, P. Singh, and R. P. Singh, “Recycling of organic wastes in agriculture: an environmental perspective,” Int. J. Environ. Res., vol. 13, pp. 409–429, 2019.

Erni Suryani, “Pemanfaatan Kompos Organik Terhadap Pertumbuhan Tanaman Jagung Dan Sifat Fisik Tanah,” JUSTER J. Sains dan Terap., vol. 1, no. 1, pp. 44–48, 2022, doi: 10.55784/juster.vol1.iss1.17.

J. F. Nipa, M. H. T. Mondal, and M. A. Islam, “Design, development and performance evaluation of small-scale fodder chopping machine for farmers,” Res. Agric. Eng., vol. 67, no. 3, pp. 116–122, 2021.

N. I. Mansyur, E. H. Pudjiwati, and A. Murtilaksono, Pupuk dan pemupukan. Syiah Kuala University Press, 2021.

M. Handajaningsih, “Compost derived from local organic materials as source of plant nutrients,” in IOP Conference Series: Earth and Environmental Science, 2018, vol. 215, no. 1, p. 12030.

N. L. Nurida, A. Dariah, and S. Sutono, “Pembenah Tanah Alternatif untuk Meningkatkan Produktivitas Tanah dan Tanaman Kedelai di Lahan Kering Masam,” Pembenah Tanah Altern. untuk Meningkat. Produkt. Tanah dan Tanam. Kedelai di Lahan Kering Masam, vol. 39, no. 2, pp. 99–108, 2015.

K. Nadliroh, “Rancang Bangun Mesin Penggiling Kotoran Kambing dengan Sudu Berbentuk Martil,” J. Mesin Nusant., vol. 2, no. 1, pp. 18–26, 2019, doi: 10.29407/jmn.v2i1.13345.

S. Andjar Sari, P. Vitasari, and S. L. A., “Pengembangan Desain Mesin Penghancur Kotoran Kambing Dengan Menggunakan Metode QFD,” J. Teknol. Dan Manaj. Ind., vol. 4, no. 2, pp. 29–34, 2018, doi: 10.36040/jtmi.v4i2.243.

I. Sodikin, J. Waluyo, and Y. Pratiwi, “Rancang bangun tungku pemanas untuk pande besi yang ramah lingkungan guna meningkatkan kapasitas produksi alat pertanian,” Simp. Nas. ke 15 RAPI, pp. 458–463, 2016.

P. C. Okolie, I. C. Chukwujike, J. L. Chukwuneke, and J. E. Dara, “Design and production of a fish feed pelletizing machine,” Heliyon, vol. 5, no. 6, p. e02001, 2019.

E. K. Mindarta, A. A. Wibowo, and A. B. N. R. Putra, “Designing portable chopping plastic waste machine utilizing electric motor,” in MATEC Web of Conferences, 2018, vol. 204, p. 4005.

V. A. Wardhany, A. Hidayat, and A. Afandi, “Smart chopper and monitoring system for composting garbage,” in 2019 2nd International Conference of Computer and Informatics Engineering (IC2IE), 2019, pp. 74–78.

Mukono., “Toksikologi Lingkungan. Surabaya: Airlangga University Press.,” vol. 6, no. 3, 2005.

R. Bulan, R. Rahmah, A. R. Hasan, and A. Sitorus, “Design and construction of oil palm fronds (OPF) compost mixer machine type rotary double helix drum,” in 2019 5th International Conference on Computing Engineering and Design (ICCED), 2019, pp. 1–4.

I. N. Permadi and D. B. Nisa, “A Model Experiment Design Using the Taguchi Method: A Case Study Of Making Concrete Roof,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 36–44, 2023.

G. Filhaq, S. Aprianto, and H. Alfianto, “Design of Smart Locker Door Using Quality Function Deployment Based on ATMega 2560 Microcontroller,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 25–35, 2023.

F. Pohan, I. Saputra, and R. Tua, “Scheduling Preventive Maintenance to Determine Maintenance Actions on Screw Press Machine,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 1–12, 2023.

V. C. Dewi, V. Amrizal, and F. E. M. Agustin, “Implementation of Adaptive Neuro-Fuzzy Inference System and Image Processing for Design Applications Paper Age Prediction,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 45–57, 2023.

T. M. Sari and W. Dini, “Risk Assessment and Mitigation Strategy in The Halal Broiler Supply Chain,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 13–24, 2023.

Downloads

Published

2023-06-30

Issue

Vol. 21 No. 1 (2023): December 2023

Section

Articles

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

 

Copyright Notice

An author who publishes in the SITEKIN Journal agrees to the following terms:

  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  • Author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.