Optimization of Ocean Wave Energy Harvesting with Pontoon Model– Single Pendulum
DOI:
https://doi.org/10.24014/sitekin.v21i1.25992Abstract
Renewable energy is energy that is needed in this modern era. The need for electrical energy in the present is a primary need, much of the sustainability of human life is supported by the existence of electrical energy. We are in Indonesia where Indonesia is a country consisting of many islands, and 77% of Indonesia's territory is water. By utilizing the energy contained in ocean waves to make electrical energy by using sea wave power plants. Ocean wave energy harvsting, single pendulum pontoon systems, are one of the alternatives to energy problems in this world. Simulations were carried out to determine the electrical energy to be obtained from the from ocean wave energy harvesting, single pendulum pontoon system. The simulation was carried out with matlab software by controlling the variable amplitude of ocean waves 0.0125m, 0.025m, 0.0375m, 0.05 m, and 0.0625m. From the simulation results, current, power and voltage data generated from the ocean wave power generation system were obtained. In this study, the results obtained were different amplitude levels that had a real influence on the results of current, power and voltage generated from ocean wave energy harvesting - single pendulum pontoon system using minitab software to process data with a complete random design method. Where the higher the amplitude of ocean waves, the higher the value of the results of currents, voltages and power generated by single pendulum pontoon model from ocean wave energy harvesting.
References
I. Butarbuta, “INFLUENCE OF VARIATIONS IN THE NUMBER OF SPOONS, WIND SPEED AND PROPELLER POSITION-PROPELLER ON ELECTRIC POWER GENERATION ON SAVONIUS WINDMILL PROTOTYPES,” 2021. [Online]. Available: http://etd.repository.ugm.ac.id/
A. BOEDIONO, YULNAWATI, and M. A. SETIADI, “Tingkat Pematangan Inti Oosit Domba dari Ovarium dengan Status Reproduksi dan Medium Maturasi yang Berbeda,” HAYATI J. Biosci., vol. 13, no. 4, pp. 131–136, 2006, doi: 10.1016/S1978-3019(16)30307-2.
C. A. Siregar and S. Lubis, “Perencanaan Instrumen Konversi Energi Tenaga Gelombang Dengan Menggunakan Teknik Kolom Osilasi,” J. MESIL (Mesin Elektro Sipil), vol. 1, no. 1, pp. 63–71, 2020, doi: 10.53695/jm.v1i1.156.
S. I. T. I. HERLINDA, A. JAYA, Y. PUJIASTUTI, and A. U. N. U. RAUF, “Kapasitas Reproduksi, Lama Hidup, dan Perilaku Pencarian Inang Tiga Spesies Parasitoid Liriomyza sativae,” HAYATI J. Biosci., vol. 13, no. 4, pp. 156–160, 2006, doi: 10.1016/S1978-3019(16)30311-4.
D. dwi aprisetiawan Diki, I. Winarno, and B. Y. Dewantara, “Penggunaan Filter Aktif Dengan Pi Controller Untuk Meredam Harmonisa Pada Pembangkit Listrik Tenaga Solar Cell,” Kurvatek, vol. 6, no. 1, pp. 69–80, 2021, doi: 10.33579/krvtk.v6i1.1853.
J. Graves, Y. Kuang, and M. Zhu, “Pendulum energy harvester with torsion spring mechanical energy storage regulator,” Sensors Actuators A Phys., vol. 339, no. March, p. 113505, 2022, doi: 10.1016/j.sna.2022.113505.
J. Graves and M. Zhu, “Design and experimental validation of a pendulum energy harvester with string-driven single clutch mechanical motion rectifier,” Sensors Actuators A Phys., vol. 333, p. 113237, 2022, doi: 10.1016/j.sna.2021.113237.
J. Graves, Y. Kuang, and M. Zhu, “Counterweight-pendulum energy harvester with reduced resonance frequency for unmanned surface vehicles,” Sensors Actuators, A Phys., vol. 321, p. 112577, 2021, doi: 10.1016/j.sna.2021.112577.
W. Widjanarka Natasaputra and S. Sutiyanto, “‘Jurnal TRANSFORMASI (Informasi & Pengembangan Iptek)’ (STMIK BINA PATRIA) STUDI AWAL PENGUJIAN KARAKTERISTIK SIFAT FISIKA TEGANGAN-ARUS LISTRIK DAN FLUX DIODA LASER BIRU 1500 miliWatt,” J. Transform., vol. 17, no. 2, pp. 86–92, 2021.
A. Rozaq, “SISTEM MONITORING KUAT ARUS, TEGANGAN DAN DAYA SOLAR CELL PADA ALAT UKUR KUALITAS AIR TAMBAK UDANG VANAME,” J. ELKON, vol. 02, no. 01, pp. 2809–140, 2022.
G. Djoyowasito et al., “Pengaruh Induksi Medan Magnet Extremely Low Frequency (ELF) terhadap Pertumbuhan Tanaman Sawi (Brassica Juncea L),” 2019.
M. G. Fathurrachman, N. Busaeri, and N. Hiron, “ANALISIS INTEGRASI PEMBANGKIT LISTRIK HYBRID DI WILAYAH DAERAH PANTAI TASIKMALAYA SELATAN MENGGUNAKAN APLIKASI HOMER,” 2022.
F. X. Faÿ, E. Robles, M. Marcos, E. Aldaiturriaga, and E. F. Camacho, “Sea trial results of a predictive algorithm at the Mutriku Wave power plant and controllers assessment based on a detailed plant model,” Renew. Energy, vol. 146, pp. 1725–1745, 2020, doi: 10.1016/j.renene.2019.07.129.
V. Valašková, J. Melcer, and G. Lajčáková, “Moving load effect on pavements at random excitation,” Procedia Eng., vol. 111, no. TFoCE, pp. 815–820, 2015, doi: 10.1016/j.proeng.2015.07.151.
R. C. KIRANA, “Analisis Perbedaan Pemasangan Polaritas Magnet Permanen Terhadap Performa Generator 1 Fasa Aksial Fluks Multicakram,” repository.unej.ac.id, [Online]. Available: https://repository.unej.ac.id/xmlui/handle/123456789/108538
M. F. Haikal, Prototipe Pembangkit Listrik Tenaga Angin Dengan Turbin Sumbu Horizontal Dan Analisis Efek Pembebanan Rlc. dspace.uii.ac.id, 2021. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/31248
A. H. P. Ningtyas, Hidayat, and P. N. Rofiyanto, “Analisis desain frame sepeda listrik roda tiga sebagai alat bantu transportasi bagi penyandang disabilitas menggunakan software Autodesk Inventor,” J. Tek. Mesin Indones., vol. 16, no. 2, pp. 7–11, 2021, [Online]. Available: http://jurnal.bkstm.org/index.php/jtmi/article/view/234/111
R. A. Larasati, ANALISIS KARAKTERISTIK KERJA DAN JARAK MAKSIMUM LIGHTNING ARRESTER DENGAN PERALATAN PADA JARINGAN DISTRIBUSI 20 kV DI PT. PLN …. eprints.polsri.ac.id, 2021. [Online]. Available: http://eprints.polsri.ac.id/11663/
M. Darwis, N. Safitri, and Z. Zamzami, “… BANGUN PEMBANGKIT LISTRIK TENAGA MIKRO HIDRO SEBAGAI DISTRIBUTED GENERATOR DI LABORATORIUM PEMBANGKIT DI POLITEKNIK NEGERI …,” J. TEKTRO, 2021, [Online]. Available: http://e-jurnal.pnl.ac.id/TEKTRO/article/view/2799
R. D. Ivana, Rancang Bangun Pembangkit Listrik Tenaga Surya Kapasitas 200 Wp Dengan Sistem Solar Charge. repository.umsu.ac.id, 2020. [Online]. Available: http://repository.umsu.ac.id/handle/123456789/14161
F. Al-Habsyi, R. Fauzi, I. Mahmudi, Y. A. Rahman, and ..., “MODIFIKASI SEPIC CONVERTER UNTUK PENGONTROLAN TEGANGAN KELUARAN BERBASIS LOGIKA FUZZY,” …, 2022, [Online]. Available: https://foristek.fatek.untad.ac.id/index.php/foristek/article/view/147
M. S. D. Ellianto and Y. E. Nurcahyo, “Rancang Bangun dan Simulasi Pembebanan Statik pada Sasis Mobil Hemat Energi Kategori Prototype,” J. Engine Energi, Manufaktur, dan Mater., vol. 4, no. 2, pp. 53–58, 2020.
M. H. A. Zulfikar and A. U. Krismanto, “SKRIPSI–ENERGI LISTRIK PERANCANGAN SISTEM MONITORING PADA PEMBANGKIT LISTIRK TENAGA SURYA 200 WP DI BAGAN TANCAP BERBASIS …,” eprints.itn.ac.id. [Online]. Available: http://eprints.itn.ac.id/11489/8/1812028_COVER.pdf
H. Darmono and A. M. Imammudin, “PEMANFAATAN INTENSITAS SINAR MATAHARI UNTUK PANEL SURYA SEBAGAI SUMBER DAYA MENGGUNAKAN POWER INVERTER DC KE AC DAYA …,” J. Tek. Ilmu dan …, 2021, [Online]. Available: http://jurnal.polinema.ac.id/index.php/jtia/article/view/1650
A. H. P. Ningtyas, I. A. Pahlawan, and R. P. Putra, “Pemilihan Material Yang Aman Untuk Frame Sepeda Listrik,” vol. 20, no. 1, pp. 314–318, 2022.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
