Environmental Ergonomic Analysis: Understanding Noise Effects on Security and Comfort
DOI:
https://doi.org/10.24014/sitekin.v21i2.29411Abstract
In activities production PT. XYZ has several forms of production processes. It is a grinding process, which has the potential to give rise to noise coming from the tools used during the production process. The continuous noise produced can damage healthy hearing workers. To know the noise level produced during the grinding process on module 04 and module 05 of the Santos project and calculate the recommended time When exposed to noise. Data collection will use a sound level meter to gauge noise. Data calculations using distribution frequency and counting level noise equivalent ( Leq ) obtain point noise on Dilinta Sembiring and Saiful above the Threshold Limit Value (NAV), namely 86.87 dBA and 85.35 dBA. Calculated exposure time use method NIOSH recommends that Crossed Sembiring can work for 5 hours 19 minutes and Saiful for 7 hours 37 minutes. If No, use PPE when exposed continuously.
Keywords: Ergonomics Environment, Noise, Grinding, NOISH
References
R. H. Nasution, “Analisis Pengaruh Temperatur dan Kebisingan Terhadap Kerja Sistem Cardiovascular di CV. Bintang Terang Medan,” vol. 5, no. 2, pp. 1–7, 2017.
S. Zaheer, “Patterns of musculoskeletal disorders in health care providers and their association with ergonomic risks,” International Journal of Occupational Safety and Ergonomics, vol. 29, no. 4, pp. 1523–1531, 2023, doi: 10.1080/10803548.2022.2154483.
S. K. Zeverdegani, “Latent class-derived patterns of musculoskeletal disorders in sedentary workers and chair ergonomic design,” International Journal of Occupational Safety and Ergonomics, vol. 28, no. 3, pp. 1636–1641, 2022, doi: 10.1080/10803548.2021.1916239.
J. Hwang, “Evaluation of ergonomic risks for work-related musculoskeletal disorders of nursing tasks in Korea,” International Journal of Occupational Safety and Ergonomics, 2023, doi: 10.1080/10803548.2022.2157123.
A. Sasmita, M. Reza, and Rodesia Mustika Rozi, “Pemetaan Dan Perhitungan Pemaparan Tingkat Kebisingan Pada Industri Pengolahan Kayu Di Kecamatan Siak, Provinsi Riau,” Al-Ard: Jurnal Teknik Lingkungan, vol. 6, no. 2, pp. 68–76, 2021, doi: 10.29080/alard.v6i2.1185.
I. Mindhayani, “Pengaruh Desain Interior Ergonomis pada Mood Karyawan,” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, vol. 6, no. 2, pp. 122–126, 2020.
Ir. E. G. M. si dedy Fredianta g, Dr. Listiani Nurul Huda, MT, “Analisis Tingkat Kebisingan Untuk Mereduksi Dosis,” e-Jurnal Teknik Industri, vol. 2, no. 1, pp. 1–8, 2013.
E. Lourrinx, M. Navis Mirza, R. Eka Praditya, S. Terapan Keselamatan dan Kesehatan Kerja, and P. Rukun Abdi Luhur, “Analisis Intensitas Kebisingan pada Area Fabrikasi PT XYZ Bintan,” Media Cetak, vol. 2, no. 2, pp. 409–418, 2023, doi: 10.55123/insologi.v2i2.1929.
A. Choobineh, “A multilayered ergonomic intervention program on reducing musculoskeletal disorders in an industrial complex: A dynamic participatory approach,” Int J Ind Ergon, vol. 86, 2021, doi: 10.1016/j.ergon.2021.103221.
N. Nelfiyanti, “Identification of Ergonomic Issues Among Malaysian Automotive Assembly Workers by Using the Nordic Body Map Method,” Lecture Notes in Mechanical Engineering, vol. 46. pp. 69–81, 2021. doi: 10.1007/978-981-15-9505-9_8.
A. Sasmita, M. Reza, and Rodesia Mustika Rozi, “Pemetaan Dan Perhitungan Pemaparan Tingkat Kebisingan Pada Industri Pengolahan Kayu Di Kecamatan Siak, Provinsi Riau,” Al-Ard: Jurnal Teknik Lingkungan, vol. 6, no. 2, pp. 68–76, 2021, doi: 10.29080/alard.v6i2.1185.
D. Syahputra, “Perancangan alat pemotong nenas yang ergonomis untuk meningkatkan produktivitas,” 2012.
T. J. Widagdo, “Rancangan Ergonomis Alat Bantu Cuci Mobil,” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, vol. 8, no. 1, pp. 1–4, 2022.
E. Fredianta, G. D., Huda, L.N., Ginting, “Analisis Tingkat Kebisingan Untuk Mereduksi Dosis Paparan Bising Di Pt. Xyz,” Jurnal Teknik Industri FT USU, vol. 2, no. 1, pp. 1–8, 2013.
L. Cruz-Ausejo, “Can working at home be a hazard? Ergonomic factors associated with musculoskeletal disorders among teleworkers during the COVID-19 pandemic: a scoping review,” International Journal of Occupational Safety and Ergonomics, vol. 29, no. 4, pp. 1335–1344, 2023, doi: 10.1080/10803548.2022.2127246.
J. M. Bernardes, “A low-cost and efficient participatory ergonomic intervention to reduce the burden of work-related musculoskeletal disorders in an industrially developing country: an experience report,” International Journal of Occupational Safety and Ergonomics, vol. 27, no. 2, pp. 452–459, 2021, doi: 10.1080/10803548.2019.1577045.
Effine Lourrinx, Muhammad Navis Mirza, and Rizki Eka Praditya, “Analisis Intensitas Kebisingan pada Area Fabrikasi PT XYZ Bintan,” INSOLOGI: Jurnal Sains dan Teknologi, vol. 2, no. 2, pp. 409–418, 2023, doi: 10.55123/insologi.v2i2.1929.
A. M. Idkhan and F. R. Baharuddin, “Occupational health and productivity in noise exposure and room layout,” International Journal of Scientific and Technology Research, vol. 8, no. 11, pp. 516–522, 2019.
M. S. Denadai, “An ergonomics educational training program to prevent work-related musculoskeletal disorders to novice and experienced workers in the poultry processing industry: A quasi-experimental study,” Appl Ergon, vol. 90, 2021, doi: 10.1016/j.apergo.2020.103234.
M. S. Sohrabi, “Effectiveness of an ergonomics training program on musculoskeletal disorders, job stress, quality of work-life and productivity in office workers: a quasi-randomized control trial study,” International Journal of Occupational Safety and Ergonomics, vol. 28, no. 3, pp. 1664–1671, 2022, doi: 10.1080/10803548.2021.1918930.
S. S. Arnau, “Musculoskeletal disorders risk assessment methods: a scoping review from a sex perspective,” Ergonomics. 2023. doi: 10.1080/00140139.2023.2168767.
F. E. B. Setyawan, Amalia Wahyu Natasari, Nesrin Zaharah, Divi Aditya Romadhona Putra, Wafiyah Hasanah, and Ronty Birnanda Ramadhona, “Preventive Management for Occupational Diseases in Battery Industry,” KELUWIH: Jurnal Kesehatan dan Kedokteran, vol. 3, no. 1, pp. 1–8, 2021, doi: 10.24123/kesdok.v3i1.4678.
D. Das, “Interactions between work-related factors, perceived fatigue and musculoskeletal disorders among handicraft artisans: structural equation model analysis,” Ergonomics, 2024, doi: 10.1080/00140139.2023.2300952.
A. Kolus, “Examining the relationship between human factors related quality risk factors and work related musculoskeletal disorder risk factors in manufacturing,” Ergonomics, vol. 66, no. 7, pp. 954–975, 2023, doi: 10.1080/00140139.2022.2119285.
S. L. Fischer, “A cross-sectional survey of musculoskeletal disorder hazard exposures and self-reported discomfort among on-shore wind turbine service technicians,” Ergonomics, vol. 64, no. 3, pp. 383–395, 2021, doi: 10.1080/00140139.2020.1831079.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
