Risk Analysis of Occupational Accident in Warehousing with Hazard Identification, Risk Assessment, and Risk Control Methods at PT XYZ
DOI:
https://doi.org/10.24014/sitekin.v21i2.31106Abstract
In the fertilizer manufacturing industry, there are activities in the warehousing area where the industry and this work area have a high work risk so that it needs to be controlled so that the workplace is safe and workers are avoided from various work accidents. Therefore, the purpose of this study is to analyze the risk of work accidents and make appropriate control of risks in the warehousing area of the fertilizer manufacturing industry. The methods used in controlling the risk of work accidents in this warehousing area are Hazard Identification, Risk Assessment, and Risk Control. The results of the study were seventeen (17 risks), with a risk level of 88% in the medium category and 12% in the high category in activities related to the use of forklift lifting equipment.
References
Albar, M. E., Parinduri, L., & Sibuea, S. R. (2022). Analisis Potensi Kecelakaan Menggunakan Metode Hazard Identification and Risk Assessment (HIRA). Buletin Utama Teknik, 17(3), 241-245.
Hayati, D. (2020). Identifikasi resiko bahaya di pergudangan dengan menggunakan HIRADC. In Prosiding Seminar Nasional Manajemen Industri dan Rantai Pasok (Vol. 1, No. 1, pp. 80-84).
Ihsan, T., Edwin, T., & Irawan, R. O. (2016). Analisis risiko k3 dengan metode hirarc pada area produksi pt cahaya murni andalas permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179-185.
Mahawati, Eni dkk. (2021). Keselamatan Kerja dan Kesehatan Lingkungan Industri. Yayasan Kita Menulis.
Putra, D. P. (2017). Penerapan inspeksi keselamatan dan kesehatan kerja sebagai upaya pencegahan kecelakaan kerja. HIGEIA (Journal of Public Health Research and Development), 1(3), 73-83.
Putro, D. S. (2021). Strategi Perbaikan Implementasi Manajemen Keselamatan dan Kesehatan Kerja (K3) TPAS Wisata Edukasi Talangagung Kabupaten Malang. Jurnal Serambi Engineering, 6(3).
Rahayu, M., Yustiana, M., & Juliani, W. (2020). Perancangan dan Implementasi Keselamatan dan Kesehatan Kerja (K3) di PTPN 8 Perkebunan Ciater-Jawa Barat. Charity: Jurnal Pengabdian Masyarakat, 3(1).
Ramli. (2011). Sistem Manajemen Keselamatan dan Kesehatan Kerja. Jakarta: Dian Rakyat.
Sofyan, H., & Maulana, M. F. (2022). Analisis Bahaya Dan Risiko K3 Dengan Metode Hirarc Pada Area Dieshop Di Pt Xyz Plant 2. Sistemik: Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 10(1), 21-26.
Soehatman, R. (2009). Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. Jakarta: PT.Dian Rakyat.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.