TEKNIK KENDALI ADAPTIVE POLE PLACEMENT PADA PROSES NON LINEAR MULTI VARIABLE
DOI:
https://doi.org/10.24014/sitekin.v11i2.758Keywords:
CSTR, pengendali adaptive pole placement, performansiAbstract
Kendali adaptive pole placement dapat mengatasi masalah non linieritas, dimana kendali adaptive pole placement ini dapat mengatasi kelemahan yang terdapat dipengendali pole placement.Matlab-Simulink versi 7.0 digunakan untuk merangcang pengendali adaptive pole placement pada Continuous Stirred Tank Reactor (CSTR). Simulink dilakukan untuk menganalisa performansi sistem. Karakteristik performansi yang dianalisa adalah persen waktu lewatan maksimum dan waktu tetapan.Berdasarkan hasil simulasi yang diperoleh menunjukkan bahwa pengendali adaptive pole placement yang dirancang pada penelitian ini mampu menghasilkan performansi yang baik setelah diberi masukan step. Setelah dilakukan perbandingan dengan pengendali pole placement, respon sistem CSTR dengan pengendali adaptive pole placement lebih baik dari pada pole placement. Persen lewatan maksimum menurun hingga 13.6% menjadi 12% dan waktu tetapan menjadi lebih cepat, yakni dari 130 detik menjadi 100 detik.References
Åström, K. J. dan B. Wittenmark, (1989). Adaptive Control. Addison-Wesley. Massachusetts.
Faizal A. Samman dan Rhiza S. Sadjad (2008). Design of Model Reference Adaptive Control For Non Linear Plant, Teknik
Elektro, Universitas Hasanuddin, Makassar.
Ioannou, P. dan S. Jing. (1996). Robust Adaptive Control. Prentice-Hall. New Jersey.
Kwakernaak, H. dan R. Sivan. (1972). Linear Optimal Control System. John Wiley & Sons, Inc. New York.
Ljung, L. (1987). System Identification: Theory for the User. Prentice-Hall. New Jersey.
Mursyitah, Dian (2009). Analisa Pengendali Proposional Integral derivatif pada proses mixing tank. Skripsi UIN Suska Riau, Pekanbaru.
Lestari, Poppy D (2009). Perancangan Pengendali Pole Placement pada Proses Non Linier Multivariabel. Laporan Penelitian UIN Suska Riau, Pekanbaru.
Luyben, W, “Process Modeling, Simulation and Control Engineering”, 2
ndEdition. Mc Graw Hill, New York.
Ogata, K. (2002). Modern Control Engineering, Prentice-Hall, New Delhi.
R, Harry, D Yohanes, “Teknik Pemograman Menggunakan Matlab”, Grasindo. Jakarta, 2007.
Stephanopoulos, G. (1984). Chemical Process Control: An Introduction to Theory and Practice. Prentice-Hall. New Jersey.
Tham, M. T. (1999), Multivariabel Control: An Introduction to Decoupling Control. Dept. Chem. And Process Eng., University of Newscastle upon Tyne.
Downloads
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Copyright Notice
An author who publishes in the SITEKIN Journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
